全部

1·Precise prediction to Bauschinger's effect values is given based on the study of tensile yield strength for pipes, so does the range of yield strength supplied.

通过对管材抗拉屈服极限的研究，提出要准确地估计包辛格效应值，并应定出供货的屈服极限范围。

2·Tensile yield strength was used to quantitatively evaluate the interfacial interactions, which have significant influence on the tensile fracture morphology of the composites.

采用拉伸屈服强度定量表征了界面相互作用的强弱，研究了界面相互作用对三元复合体系拉伸断裂形态的影响。

3·The experiments consisted of the measurement of yield stress, tensile strength and hardness for samples cut from various parts of the forging.

试验包括对取自不同锻造零件的试块的屈服强度、抗拉强度及硬度的测量。

4·Silicon can obviously improve the elastic limit, yield point and tensile strength of steel.

硅能显著进步钢的弹性极限，屈从点和抗拉强度，故普遍用于作弹簧钢。

5·Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.

通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。

6·To the problem of more yield strength error in SSAW pipe transverse strip specimen tensile tests, analyze the reason of the error, put forward corresponding solving method.

针对螺旋埋弧焊钢管横向板状试样在拉伸试验时存在的屈服强度误差较大的问题，分析了其误差较大的原因，并提出了相应的解决办法。

7·Good yield strength and tensile strength.

良好的屈服强度和抗拉强度。

8·The results indicate that the ultimate tensile strength of AM60B increases prominently with the increasing of RE, the yield strength and elongation are also improved.

结果表明，AM60B的抗拉强度随着RE的增加有显著提高，屈服强度、伸长率也有所提高。

9·The results indicated that in low temperature range, the yield strength and tensile strength decreased obviously as temperature increased.

在低温范围内随温度升高屈服强度和抗拉强度明显降低。

10·A modified theory of metal volume fraction is put forward to precisely predict tensile properties including elastic modulus, yield stress and tensile strength.

提出了修正后的金属体积分数理论，准确预测了材料的弹性模量、屈服应力及拉伸强度。