全部

1·The hydroforming process is very repeatable.

内高压成形过程是很重复。

2·The technology of tube hydroforming has gained wide range application over the last few years.

管材液压成形技术近来获得了广泛的应用。

3·A general method is presented in this paper to analyze and design the control system of hydroforming system.

本文针对内高压成形系统的控制系统设计进行研究。

4·Manufactured with seamless links for, at present there is usually used in hydroforming technology and hot forming two.

对于采用无缝管制造三通来讲，目前通常所采用的工艺有液压胀形和热压成形两种。

5·Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.

介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。

6·The support flanges are formed by pinching the blank during the hydroforming process to provide a double thickness flange.

在液压成形工艺期间，通过挤压坯料形成支撑凸缘，以提供双厚度凸缘。

7·The simulation result shows that the selection of axial feed velocity has a strong influence on hydroforming tri-branch tube.

结果表明，轴向进给速度的选取对内高压成形三通管具有重要影响。

8·With superior control over forces and motions, Interlaken's Hydroforming Press provides a greater overall quality of formed parts.

随着对力和运动控制优势，因特拉肯的内高压成形媒体提供了更大的组成部分的整体素质。

9·By using non-linear finite element theory, a non-linear finite element model for hydroforming for rear axle housing is established.

利用非线性有限元理论方法，建立了后桥壳液压胀形有限元模型。

10·A significant technique named hydroforming, by which many hollow light components can be produced, is presented to balance the contrast.

内高压成形技术正是适应这种需求而提出来的一种制造空心轻体构件的新工艺。