全部

1·This paper presents the customized equipment suitable to screw adjusting bolt module in cover sheet assembly (preassembly) for automobile assembling process.

介绍了一种自行研制的装配专机，适用于汽车“盖板总成(预装配)”中将“调整螺钉总成”拧进“盖板总成”的装配工序。

2·The suspended scale rack is mainly composed of a loading bolt, an adjusting bolt, a loading member, a weighing supporting roller, a supporting roller rack, a sensor, etc.

悬浮式秤架主要是由加载螺栓，调整螺栓，加载构件，称重托辊、托辊架、传感器等组成的。

3·Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.

在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。

4·Three types of adjustable turning rolls: manual lead screw adjusting, manual bolt shifting and electric sliding plate shifting.

三种可调式滚轮架：手动丝杆可调式、手动螺栓移位式和电动滑板移位式。

5·This paper analysed the cause of falling roof, raised some methods of roof management, such as adjusting mineral blast, bolt support and prediction of roof caving. It ensured safety in mining.

本文分析了顶板冒落的原因，提出了顶板管理方法，如调整落矿工艺，顶板锚网支护和冒顶预测预报，结果保证了采矿的安全。

6·The high elastic and adjustable sliding plate and the Y-shaped positioning plate are fixedly connected at the adjusting sliding grooves through the butterfly shaped bolt.

高弹性可调滑动板和Y形定位板通过蝶形螺栓在调节滑槽、调节滑槽处固定连接。

7·Through adjusting gasket structure, its mechanical performance is changed to consist with request of bolt, so that flange joints can meet the standard of sealing request.

通过垫片工艺结构的调整，使其力学性能与紧固件的要求一致，使法兰接头符合操作时的密封性。

8·The anchorage length of bolt can be controlled by adjusting the distance of anchor-boot and pressing ring.

通过调整压环与锚头之间的距离来确定锚杆的锚固长度。

9·Variable play cam is the effective number of the control spring, and the height of the bolt adjusting spring;

变剧凸轮是控制弹簧的有效圈数，节距刀下面螺栓调节弹簧高度；

10·The utility model can increase the swing assisting Angle and the swing assisting strength through adjusting the central adjusting screw bolt to meet the requirements of different patients.

它通过调节中心调节螺杆可增加助摆角度和助摆力量，以适应不同患者的需要。