全部

1·The dual axis table serie ST 2500 is a high accuracy position rate system designed for the test and calibration of gyros, accelerometers and inertial guidance systems.

双轴平台系列ST 2500是一个高精度位率系统，专为测试及校正陀螺仪、加速表和惯性制导系统。

2·The single axis table series rt 1100 is an accurate position rate system designed for the test and calibration of MEMS, gyros, accelerometers and inertial guidance systems.

单轴平台系列rt 1100是一个高精度位率系统，其设计宗旨在于测试及校正MEMS、陀螺仪，加速表和惯性制导系统。

3·The single axis table series ST 1100 is a high accuracy position rate system designed for the test and calibration of gyros, accelerometers and inertial guidance systems.

单轴平台系列ST 1100是一个高精度位率系统，其设计宗旨在于测试及校正陀螺仪﹑加速表和惯性制导系统。

4·The dual axis table series st 2356 is a high accuracy position rate system designed for the test and calibration of gyros, accelerometers and inertial guidance systems.

双轴平台系列ST 2356是一个高精度位率系统，专为测试及校正陀螺仪、加速表和惯性制导系统。

5·The dual axis table serie ST 2400 is a high accuracy position rate system designed for the test and calibration of gyros, accelerometers and inertial guidance systems.

双轴平台系列ST 2400是一个高精度位率系统，专为测试及校正陀螺仪、加速表和惯性制导系统。

6·The means of working out the table of quasi dynamic calibration of copper cylinders is presented. The error on working out the table with quasi dynamic calibration is also analyzed.

介绍了测压铜柱准动态校准压力表的编表方法，分析了编表误差。

7·The meaning of quasi dynamic calibration of copper balls is presented and factors affecting errors on working out the table with quasi dynamic calibration is analyzed.

介绍了火炮膛压测压铜球准动态校准含义，分析了引起准动态校准压力对照表编表误差的因素。

8·In this paper, we have an in-depth and meticulous research on the calibration of rotary table, rotation scan and piece and automatic data registration technology in reverse engineering.

本论文对旋转工作台标定、旋转扫描拼合及逆向工程中的多视数据自动拼和技术做了较为深入地研究。

9·For the calibration of rotary table, the calibration principle is discussed, two calibration blocks are designed and three calibration methods are discussed and analyzed.

对于旋转工作台标定，论述了标定原理，设计两种标定块，并且讨论分析了三种标定方法。

10·With piston oxygen pressure gauge, pressure gauge calibration must adopt isolation tank and water will do spacer piston pressure gauge of oil isolation, make water into oxygen table.

用活塞压力计校验氧压力表时，必需采用隔离罐，用水做隔离液将活塞压力计的油隔离，使水进入氧气表中。