全部

1·The effect of relative compaction, initial moisture content of specimens and strain rate was investigated.

探讨了试样的相对压实度、初始含水量、应变速率对稳定状态的影响。

2·The effect of relative compaction, initial moisture content of specimens, strain rate, consolidation ratio and reconstitution of specimens and drainage condition are investigated.

对试样的相对压实度、初始含水量、应变速率、固结比、试样的重塑、排水条件因素等对稳定状态的影响进行了试验研究 。

3·It is required for designing compaction density in the field to have both testing results from the relative density test and the Proctor compaction tests.

本文通过大量的粉煤灰击实试验和相对密度试验，分析了试验方法对设计密度的影响。

4·Ride comfort is one of prime performance of vibratory compaction machinery, which is closely relative to drivers' comfort, reliability and life of parts of machinery.

平顺性是振动压实机械一个重要的性能，它与驾驶员的舒适性、零部件的可靠性以及使用寿命有着密切的关系。

5·The experimental results indicate that the relative density increases when improving the discharge voltage, increasing the discharge times and heating up the powder before compaction.

试验结果表明增加放电电压、多次放电、对粉末进行预热，均能提高压坯的平均致密度。

6·The results show that the distributions of the relative density and the stress are very close at the top, the longitudinal section and the lateral wall of the compacts during the warm compaction.

结果表明：在钼粉末的温压成形过程中，压坯顶部半端面、轴截面和侧壁的相对密度分布等值线和其应力分布等值线非常接近。

7·By analysing the monitoring data and adjusting the construction procedure in time, the relative displacement at contact surface of the wall footing caused by non uniform roller compaction of tran...

通过资料分析并及时调整施工程序，控制了因两侧过渡料碾压不均衡产生的墙底接触面错动。