全部

1·Good lubricating performance, smooth surface of hot rolled products.

润滑性能好，热轧制品表面光洁。

2·The over burnt temperature of the 7B04 alloy hot rolled heavy plate is 481.

分析结果表明：（1）7B04铝合金热轧厚板的过烧温度为481。

3·The scale defect is an important influence factor on surface quality of hot rolled strip.

氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。

4·The reformation of coiling temperature control system for hot rolled strip was applied double steps.

针对卷取温度控制系统分步改造的特点，实施了双重化改造方案。

5·The composition and forming mechanism of black strips on Al-Zn-Mg-Cu hot rolled plates were studied.

研究了热轧高锌合金板材表面黑条缺陷的成分、产生机理及消除方法。

6·The importance of hot rolled profile to flatness control of cold rolling is also clarified in theory.

从理论上阐明了铝热轧板形对冷轧带材平直度控制的重要性。

7·Production hot rolled ultra thin strip can bring good benefits, but increase the difficulties of rolling.

生产热轧薄带在给企业带来丰厚效益的同时，也使生产难度增加。

8·In the present article, the feasibility of the production of hot rolled TRIP steels using TSCR process was analyzed.

本文就薄板坏连铸连轧生产热轧TRIP钢的可行性进行了分析和讨论。

9·Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.

经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

10·The structure and installation of the pipe nozzles have important effect on the cooling process of hot rolled strip and plate.

冷却集管及喷嘴的结构和安装对于热轧板带层流冷却效果有重要的影响。

热轧的

1·SEM and XRD results show that the composite that is hot rolled after vacuum forming, has relatively high density and can avoid being oxidized effectively.

结果表明，采用真空热压后热轧工艺制备的碳纳米管铜基复合材料的致密度较高且能有效地防止被氧化。

2·This paper describes the experimental results of the strength and stamping forming property of the hot rolled titanium steel plates, and presents their application in automotive production.

叙述了热轧钛钢板的强度和冲压成形性能的试验结果，介绍了钛钢板在汽车生产中的应用。

3·Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.

经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

4·The scale defect is an important influence factor on surface quality of hot rolled strip.

氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。

5·This paper introduces the contrast test of wear resistance of hot rolled low - carbon high strength bainite steel plate to ordinary steel plate on QLK800.32 bucket wheel reclaimer.

本文介绍了热轧低碳贝氏体高强钢板在qlk800.32型斗轮取料机上与普碳钢板进行耐磨性对比工业试验的情况。