全部

1·One being the vocalizations you are probably all familiar with, which they emit through their blowholes.

一个是你们可能都很熟悉的发声，即它们通过气孔发出声音的方法。

2·Whales take in air through blowholes near the tops of their heads.

鲸鱼是地球上最有趣的动物之一。

3·Feel warm ocean spray leap into rainbows, as seawater roars from hidden blowholes.

感受温暖的海洋喷成彩虹的飞跃，因为海水从隐藏气孔怒吼。

4·Slag, blowholes, and paint on unfused regions were observed at the welded junctions.

在焊接处看到了夹渣，气孔及未熔透区的油漆。

5·The first-new discharge valve, good vacuum degree, the product is macroscopy and free of blowholes;

全新出料阀门，真空度好，制品宏观无气泡；

6·The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.

生产结果表明，铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷，铸件品质稳定。

7·This paper researches on 4100QB Cylinder-block of the KW moulding line, particularly introduces the forming mechanism of blowholes on 4100QB Cylinder-block.

本论文以在KW造型线上生产的4100QB机体作为研究对象，详细介绍了4100QB机体产生的侵入性气孔的形成机理。

8·Defects such as blowholes, cracks can be easily formed during welding process of nickel materials, which will severely affect the quality of the welding joint.

镍材焊接时易形成气孔和裂纹等缺陷，严重地影响焊接接头的质量。

9·It was showed in practice that the welding inclusions and blowholes were the main causes leading to the explosion of the tanks or the cracking of the welding seams.

实践表明，焊接夹杂和气孔是引起罐体焊缝裂纹或导致爆炸的主要原因。

10·Batch production shows there are no shrinkage cavity and porosity in casting, and no blowholes and sand inclusions on the top surface. The yield of the casting is 81%.

经批量生产验证，铸件内无缩孔、缩松缺陷，上表面无渣孔、气孔缺陷，工艺出品率81%。

气孔

1·Slag, blowholes, and paint on unfused regions were observed at the welded junctions.

在焊接处看到了夹渣，气孔及未熔透区的油漆。

2·The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.

生产结果表明，铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷，铸件品质稳定。

3·Defects such as blowholes, cracks can be easily formed during welding process of nickel materials, which will severely affect the quality of the welding joint.

镍材焊接时易形成气孔和裂纹等缺陷，严重地影响焊接接头的质量。

4·Batch production shows there are no shrinkage cavity and porosity in casting, and no blowholes and sand inclusions on the top surface. The yield of the casting is 81%.

经批量生产验证，铸件内无缩孔、缩松缺陷，上表面无渣孔、气孔缺陷，工艺出品率81%。

5·It has been speculated that, as the blowholes evolved and migrated to the top of the head, the neural pathways serving sense of smell may have been nearly all sacrificed.

据推测，由于鲸鱼的气孔进化并最终移到了头部的正中，所以掌管嗅觉的神经纤维几乎全部不见了。