全部

1·You plan to always boot the new LPAR as a DHCP client with the static IP address defined for it in the dhcpd.conf file.

通常将新的LPAR作为dhcp引导，并且在dhcpd . conf文件中包含为它定义的静态IP地址。

2·The scheme of the invention can be used for acquiring the complete route information of the DHCP server and the DHCP client.

本发明方案可以用于获取DHCP服务器以及DHCP客户端的完整路径信息。

3·The auto-netsh.sh script tunes some kernel networking parameters, configures the loopback interface, and starts up a DHCP client.

auto - netsh . sh脚本调整一些内核联网参数，配置loopback接口，并启动一个DHCP客户机。

4·The options contained within the host section in the sample are the minimum needed to install the LPAR and be able to continue to use the entry for subsequent booting of the LPAR as a DHCP client.

这个示例的host部分仅包含安装LPAR所需的最少选项(并且以后将LPAR作为DHCP客户机引导时还可以使用这个选项)。

5·If everything went according to plan, you should now be able to attach to the wireless network we just made, network ID test, run a DHCP client, and get DHCP service from your regular DHCP server.

如果一切按计划进行，那么现在您应该能够连接到我们刚刚建立的无线网络(网络标识为“test”)，能够运行DHCP客户机并从常规的DHCP服务器获取DHCP服务。

6·If the lease time that remains on Dynamic Host Configuration Protocol (DHCP) address assigned to offline server is exceeded, another client can obtain the IP address of the problem DC.

如果已超出为脱机服务器分配的动态主机配置协议(DHCP)地址上所剩的租用时间，另一个客户端即可获得问题DC的IP地址。

7·If the lease time that remains on Dynamic Host Configuration Protocol (DHCP) address assigned to offline server is exceeded then another client can obtain the IP address of the problem DC.

如果已超出为脱机服务器分配的动态主机配置协议(DHCP)地址上所剩的租用时间，另一个客户端即可获得问题DC的IP地址。

8·The VPN server may not be able to get IP from DHCP for the VPN client. So, you may want to re-configure VPN host networking Settings.

VPN服务器可能无法从DHCP获得分配个VPN客户端ip地址。因此，你须要重新配置VPN主机的网络设置。

9·Network features include support for TFTP server and client, DHCP, DNS, simple WEB server, virtual file systems.

支持的网络功能包括TFTP服务器端和客户端，DHCP， DNS，简易WEB服务器，虚拟文件系统等。