全部

1·Curing agent for thermosetting powder coatings.

热固性粉末涂料固化剂。

2·The energetic curing agent C has good physical compatiblity with GAP.

合成的含能固化剂与GAP有良好的物理相容性。

3·Besides, the content of curing agent affects the color of the cured product greatly.

此外，硬化剂含量对硬化生成物之颜色亦影响甚钜。

4·Therefore it becomes a tendency to develop nonionic type waterborne epoxy curing agent.

开发非离子型水性环氧固化剂是其发展趋势之一。

5·Some typical chemical structures of curing agent and their synthesis processes are introduced.

介绍了这三类含磷固化剂的典型化学结构以及它们的合成。

6·A new lag inflating curing agent could be developed by controlling the expanding speed properly.

通过对快速膨胀变形的适当控制，可开发出滞后膨胀式脱模养护剂。

7·The relations between the time of surface drying and the quantity of curing agent was established.

测定了固化剂用量与涂膜表干时间的关系，表干时间随固化剂用量的增多而减短。

8·The application of curing agent bisphenol-AF and accelerator BPP to fluorine rubber was investigated.

对硫化剂双酚af，促进剂bpp在氟橡胶中的应用进行了研究。

9·The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent.

在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。

10·This paper summarized the current research development of nitrite-free curing agent for meat and its products.

本文综述了肉类及肉制品中无硝腌制剂的研究进展。