全部

1·Must have 10 years experience in die casting.

必须有10年压铸方面的工作经验。

2·Used new technology and method for the design of die casting machine.

采用新工艺、新方法，以提高压铸机的可靠性。

3·One-time die casting mold, the weight error is small, high efficiency.

模具一次性压铸成形，重量误差小，生产效率高。

4·We are an OEM supplier of water pump, tensioner, die casting. E. W. p.

我们是水泵、涨紧轮、铸件、电子水泵的原厂件供应商。

5·Before I left Buhler within 5 years job is Die Casting Project Manager!

离开布勒前5年的工作是压铸机项目经理！

6·During die casting, core deformation resulting in batches rejected castings is very easy.

压铸模具的型芯变形失效很容易造成铸件的成批量报废。

7·The application and research of die casting die CAD/CAM at home and abroad are intro duced.

介绍了国外压铸模CAD／CAM的研究进展和国内已经取得的成果和研究简况。

8·Influence of Die Casting Process on Hot-crack and its formation mechanism of AM60B alloy are discussed.

分析了AM 60 B合金热裂纹形成的机制，讨论了压铸工艺对AM 60 B合金热裂纹的影响。

9·Controlling deformation and flow of semisolid alloy slurry is the key of die casting of semisolid alloy.

半固态合金挤压工艺的关键是控制半固态合金坯料的流动和变形。

10·Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover .

并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。

压铸

1·One-time die casting mold, the weight error is small, high efficiency.

模具一次性压铸成形，重量误差小，生产效率高。

2·Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover .

并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。

3·Die casting technology of high pressure for aluminum wheel can solve this problem.

铝合金轮毂高压压铸技术的诞生解决了这一难题。

4·The cracking causes of the die casting mould of SKD61 steel were analyzed by chemical composition analysis, mechanical property testing, microstructure examination and fracture analysis.

通过化学成分分析、力学性能测试、金相检验以及断口分析等方法对SKD61钢压铸模具开裂原因进行分析。

5·Must have 10 years experience in die casting.

必须有10年压铸方面的工作经验。