全部

1·In rotation, force becomes torque, mass becomes moment of inertia, and acceleration becomes angular acceleration.

在旋转时，力变成力矩，质量变成转动惯量，加速度变成角加速度。

2·If it waits another fraction of a second, the force of gravity will overtake inertia, causing the column to break, the liquid to fall back into the bowl, and the cat's tongue to come up empty.

如果它再等上几分之一秒，重力的作用将压倒惯性而破坏液柱，液体会落回碗里，而小猫的舌头则扑了个空。

3·In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.

在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。

4·Then the inertia force is reduced by the inconstant acceleration, so that the static rigidity of the machine is raised and the kinetic performance of the machine is improved.

通过变加速方法降低惯性力，提高了机床的静刚度，改善了机床的动力学性能。

5·An optimized calculating method for inertia force balance in ideal mechanism takes the interval dynamics norm as the goal function and simulates the effect of the interval in the motion join.

以间隙动力学指标作为目标函数，以理想机构惯性力平衡的优化计算，模拟反映了运动副间隙对四杆机构动力特性的影响。

6·Completely balance the shaking force and shaking moment of two geared linkages with high-ranking geared linkages groups by the method of mass flow and derivative moment of inertia flow.

对两个含有高级齿轮连杆基本杆组的齿轮连杆机构采用质量流和派生转动惯量流的思想进行惯性力和惯性力矩完全平衡。

7·Give an example of mini van door lock, analyze the inertia force on door lock when it runs.

以某微型客车门锁为例，分析了门锁在汽车行驶过程中所承受的惯性力。

8·Based on the idea of curve fitting this paper proposes a new method for calculating the balancer in partial inertia force balancing of planar linkage mechanisms.

本文根据曲线拟合的思想提出了一种解决平面杆机构惯性力部分平衡配重计算的新方法。

9·It is a easy, practical, and effective method, and can be extended to the calculation of inertia force and inertia moment balance.

方法简单实用，可推广应用于其它机构惯性力平衡和惯性力矩平衡的优化计算中。

10·Three directions equivalent inertia force of the whole mechanism oscillates severely.

整个机构各向等效惯性力均有振荡。