全部

1·The robust design method was used to develop the prescription of the emulsion for photochromatic paper.

采用稳健性设计技术研发彩色相纸用乳剂的配方。

2·This paper discusses the influence of water volume fraction, temperature, and time on the rheological properties of W/O emulsion.

这篇论文讨论了含水率、温度和时间等因素对 W/O 乳状液流变性的影响。

3·The influence factors on the pre-emulsion stabilization of D4-propenoic acid ester are discussed by using the mono-factor method.

采用单因素法探讨了影响 D4-丙烯酸酯乳液预乳液稳定性的因素。

4·You can ask the photographer for some emulsion.

你可以找摄影师要点感光乳剂。

5·The proof is recoated with dichromate emulsion .

将这张校样重新涂以重铬酸盐乳剂。

6·Most polymer emulsion may coagulate when they enter waste streams .

多数聚合物乳浊液在进入废水流时可能凝聚。

7·Synthetic liquids are now being substituted for oils in emulsion muds.

目前乳化泥浆用合成液体代替了油滴。

8·Early emulsion muds used diesel or crude oil dispersed into alkaline water-base muds.

早些的乳化泥浆是将柴油或原油分散到碱性水基泥浆中。

9·Finally specific cytokines can be induced according to the type of emulsion selected.

最后，根据所选乳剂的种类，可以诱发特殊的细胞素。

10·Conclusion: The soluble fluoride of raw black tea can be fixed by bone salt emulsion.

结论：红茶原料的水溶性氟可被骨盐乳剂所固定。

乳液

1·A kind of rigid polymer microsphere with core shell structure was synthesized by multi step composite emulsion polymerization technique.

通过多步复合乳液聚合方法合成了一种具有核壳结构的刚性聚合物微球。

2·Antifreeze agents are necessary in emulsion polymerizations carried out at low temperatures.

当在低温下进行乳液聚合时需要加入抗冻剂。

3·The emulsion polymerization also was influenced by the dosage of emulsifier and initiator, reaction temperature and reaction time and agitating speed.

乳化剂、引发剂用量及反应温度、反应时间和搅拌速度对乳液聚合反应有重要影响。

4·The optimum reaction condition is finalized and the influence of amount of emulsifier and fluoro monomers on emulsion polymerization and the product is discussed.

确定了最佳反应条件，并对乳化剂用量和含氟单体的用量对乳液聚合及其产品的影响进行了研究。

5·Research the starch adhesive modification through emulsion polymerization.

通过乳液聚合对淀粉胶改性研究。

乳剂

1·The robust design method was used to develop the prescription of the emulsion for photochromatic paper.

采用稳健性设计技术研发彩色相纸用乳剂的配方。

2·If skin is very dry, he also suggests products using a technology called vesicular emulsion.

如果皮肤非常干燥，他建议使用那些采用了被称为泡状乳剂技术的产品。

3·Use leftover white emulsion or an undercoat primer on all the surfaces you plan to paint (the table legs, the trim of the tabletop and all over the chairs).

用剩余的白乳剂或底漆涂刷所有你打算涂抹的表面(桌腿、整洁的桌面、还有椅子的各个地方)。

4·Injective emulsion can relieve pain and improve life quality of patients with lung cancer in advanced stage.

结论康莱特注射乳剂，能缓解疼痛症状，改善晚期癌症患者的生活质量。

5·Utilizing 20% lipid emulsion at a dose of 1.5 mL/kg (100 mL Bolus) IV with repeat in 15 minutes in no response is being recommended in patients hemodynamic instabiity due to poisoning.

在抢救血流动力学不稳定中毒患者时，可用1.5毫升/公斤（100毫静推）20％的脂肪乳剂，如没有反应可在15分钟内按同样剂量重复一次。

乳化液

1·Protein is protein emulsion of oil and water can form a stable emulsion sky emulsifier role.

蛋白质乳化性是指蛋白质能使油与水形成稳定的乳化液而起乳化剂的作用。

2·Moreover, by the sense diagnoses in use and maintenance and the experience, it analyses the faults of the emulsion pump in use and then proves solutions and measures.

通过泵站使用及维修中的“感官诊断”方法，并结合诊断经验，分析了乳化液泵在使用过程中出现的故障，给出了其处理方法和措施。

3·Unloading pressure and value of alarm parameter of emulsion pump can be adjusted by stroking keys.

乳化液泵卸载压力和报警参数值可利用按键根据实际需要来调整。

4·The computing formula of equivalent viscosity coefficients of emulsions was obtained, by measuring the effective viscosity of emulsion with various oil fractions.

通过对乳化液在不同油相浓度时的有效粘度的测量，获得乳化液当量粘度系数的计算公式。

5·Effects of the membrane pore size, membrane thickness, transmembrane pressure and emulsion composition on demulsification performance were investigated.

为此研究了膜孔径、膜厚度、透膜压力和乳化液组成对破乳效果的影响。

乳胶

1·Quite significantly, there was no blackening of the emulsion at the mirror's surface .

十分引人注意地，在反射镜表面的乳胶没有变黑。

2·I need some emulsion.

我需要点乳胶。

3·This product is dry powder in the dry cleaning detergent softener can also can be used as abrasive material and emulsion stabilizer SC.

本品干粉在干洗清洁剂中可做软化剂，还可以作为研磨材料的悬浮剂和乳胶稳定剂。

4·The composition of copolymer and emulsion particle size and distribution are characterized by use of FTIR and particle size analyzer.

采用FT - IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。

5·Drift of reconstructing wavelength of volume holograms may occur because of the emulsion shrink of silver salt holographic plate.

银盐全息干版的乳胶收缩将导致其记录的反射全息图再现光的波长漂移。

乳状液

1·This paper discusses the influence of water volume fraction, temperature, and time on the rheological properties of W/O emulsion.

这篇论文讨论了含水率、温度和时间等因素对 W/O 乳状液流变性的影响。

2·A mathematical model for the oxidation of polyunsaturated fatty acid (PUFA) in emulsion without oxygen compensation from atmosphere was established.

建立了在无外界氧补偿条件下乳状液中多不饱和脂肪酸(PUFA)氧化的数学模型。

3·The hydrophilic-lipophilic balance determines the type of emulsion formed and is controlled by the chemical composition of the surfactant.

亲水亲油平衡值确定所形成的乳状液的类型，并取决于表面活性剂的化学成份。

4·The mathematical model of the water cut oil draft emulsion restart after shutdown is established and validated using indoor experiment data.

建立了含水原油拟乳状液停输再启动压力的数学模型，并通过室内实验进行了验证。

5·The emulsion is toxic to birds, baby sea turtles, fish embryos, crabs, and shrimp larvae, not to mention sea grasses and marshlands.

这种乳状液对鸟类、年幼的海龟、鱼卵、蟹类、幼虾都有毒，更别提海草和湿地了。

乳浊液

1·Different types of solution, suspension, emulsion and cream paste material can be dry for a one-time production.

不同种类的溶液、悬浊液、乳浊液和膏糊状物料可实现一次性连续干燥生产。

2·Most polymer emulsion may coagulate when they enter waste streams .

多数聚合物乳浊液在进入废水流时可能凝聚。

3·The ionic charge of the particles in the fatliquor emulsion as well as the charge on the leather are important in considering its combination with the leather.

由于加酯剂乳浊液与皮革紧密结合，考虑其中微粒的离子电荷和皮革所带的电荷都很重要。

4·The key point of making peanut milk from the peanut cake is how to raise the extraction rate of peanut protein and to keep the stability of the emulsion.

用花生饼作原料生产花生乳的关键问题是如何提高蛋白质提取率及保持乳浊液的稳定性。

5·Most polymer emulsion may coagulate when they enter waste streams.

多数聚合物乳浊液在进入废水流时可能凝聚。

感光乳剂

1·You can ask the photographer for some emulsion.

你可以找摄影师要点感光乳剂。

2·The behaviour of the two kinds of the largest impurity centres of different sizes in emulsion grains under the action of oxidizing solution is studied by a method of development kinetics.

本文利用显影动力学方法研究了感光乳剂颗粒中两类不同大小的杂质中心在氧化剂作用下的行为。

(1)emulsion polymerization乳液聚合作用

(1)oil emulsion油乳胶

(1)emulsion explosive乳胶炸药

(1)emulsion paint乳胶漆；乳化漆

(1)emulsion adhesive乳化胶，乳液型粘合剂

(1)emulsion breaking破乳，乳胶分解；反乳化