全部

1·The typical starting system includes the battery, the starting motor and the solenoid switch (ignition switch), and the cables which connect these components.

典型的启动系统包括蓄电池、启动电机、电磁开关、启动开关(点火开关)和连接电线组成。

2·This article presents the content, method and process of auto engine starting system test. This paper introduces many means and circuits of no-load test, overall braking test and solenoid switch test.

提出了汽车发动机启动系统测试的内容、方法及步骤，介绍空载试验、全制动试验、电磁开关试验的方法和线路。

3·Special control switch setup operates like a solenoid valve through internally mounted control relay.

通过内部安装控制继电器，特殊控制开关进行操作就如同电磁阀一样。

4·Solenoid valve, hand wheel, valve position switch, air filter regulator and so on.

电磁阀、手轮机构、阀位开关、空气过滤减压器等。

5·And the magneto-optic material and solenoid magnetic field as key parts of magneto-optic switch are analyzed.

同时对磁光开关的关键部件的磁光材料和螺线管磁场进行了分析。

6·For example, let's assume that when a switch turns on we want to turn a solenoid on for 5 seconds and then turn it off regardless of how long the switch is on for.

例如，让我们来假设，当一个开关开启，我们需要开启螺线管5秒，然后我们不管开关开了多久，我们关掉它。

7·Driven through the solenoid valve coil, only on or off, the switch moves a short time.

电磁阀通过线圈驱动，只能开或关，开关时动作时间短。

8·E/P Positioner, P/P Positioner, Air-set, Booster relay, Air-valve, Limit switch, Solenoid valve, Lock-valve, Speed controller, Position transmitter, etc.

定位器、P/P定位器、空气过滤减压阀、气动加速器、气控阀、限位开关、电磁阀、闭锁阀、速度控制器、阀位传送器等。

9·Start the bilge water feed pump, check the feed water solenoid valve and flow switch.

启动舱底水供给泵，检查补水电磁阀和流量开关是否工作。

10·When the ignition key is turned against spring pressure past the on position to start, the starting contacts close. This connects the cranking-motor solenoid or magnetic switch to the Battery.

转动点火钥匙，弹簧的压力使“开启”位置变为“启动”位置，起动接触器闭合，使得起动电机线圈或磁性开关与电池接通。