全部

1·I run a simulator, marking the connecting pin.

我跑了SIMULATOR，管脚连接标示了。

2·The socket is composed of an insulating base body, plug pin holes of integrated component pins and connecting pins vertical to the base body.

插座由绝缘座体、集成组件管脚的插脚孔和垂直于座体的接脚构成。

3·The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.

连杆的一端与曲轴的连杆轴颈相连，另一端通过活塞销与活塞相连。

4·The technology for boring-reaming the bolt hole of pin connecting original main shaft with new runner of turbine in site of Danjiangkou hydropower plant and its effect are described.

介绍了丹江口电厂在机组改造增容中新转轮与原大轴连接销钉螺栓孔工地同镗铰所采用的方法及达到的效果。

5·Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.

导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。

6·When the screwdriver is in place, remove the E-clip (Figure F) and pin connecting the structural members and the check clapper will open with no tension.

当螺丝刀就位后，拆卸图f中的E夹和连接结构部件的销钉，则止回阀阀瓣将在没有张力的情况下开启。

7·In trunk-piston engines, a horizontal pin within the piston is encircled by the upper end of the connecting rod. This by far the most common construction.

在筒状活塞式的发动机中，活塞与连杆上端通过一个水平销子连接。这是最常见的一种结构。

8·The piston pinhole in the piston also serves as a bearing for the piston pin, which is used to connect the connecting rod.

在活塞中活塞销孔也同样为活塞销形支承面，其作用为连接连杆。

9·The connecting rod is attached to the piston by the piston pin.

连杆与活塞的连接是采用活塞销。

10·The connecting rod little end is connected to the piston pin.

连杆小头连接着活塞销。