全部

1·In addition, by changing pin shaft gain change bending radius.

此外，可通过改变销轴获得改变弯曲半径。

2·Select suitable thickness that allows bending radius of the PC sheets.

选择正确板材厚度、容许曲率半径。

3·The minimal bending radius is 6 times the thickness of electric heating cable.

安装电热带最小弯曲半径为其厚度6倍。

4·The bending radius of cable: non armoured cable, should not be less than 6 times.

电缆的允许弯曲半径：无铠装电缆，不小于电缆直径的6倍；

5·Small bending radius, simplified busbar framework, clear arrangement, easy mounting.

弯曲半径小，母线架构简明，布置清晰，安装方便。

6·So the wavelength of TFBG can be used to define the bending radius of simple supported beam.

因此可以用TFBG波长来定义简支梁的弯曲半径。

7·There was some reference value to similar parts with big thickness and litter bending radius.

对类似厚材料小半径卷圆零件的多工位级进模设计有一定的参考价值。

8·The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.

弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。

9·The radius is 0.25 and I wrap a aluminum sheets around the edge to increase the desired bending radius, if needed.

半径是0.25，我包铝合金板靠近边缘，以增加预期的弯曲半径，如果有必要的。

10·Bending radius can choose according to form 50-600mm, a journey of small can corresponding choice of smaller radius.

弯曲半径可根据所给表格选50 - 600 mm，行程小的可相应选择较小的半径。