全部

1·The second part studies and analyzes the tip leakage flow and tip vortex.

第二部分对叶顶间隙泄漏流动和叶尖涡进行了研究分析。

2·Upstream stator-rotor interaction reduces the double leakage flow intensity in the rotor tip region.

上游静叶干涉减少了动叶顶部二次泄漏流强度。

3·Based on predecessor's work, we have modified the mathematical model for leakage flow in power steering pump.

在前人研究工作的基础上，建立了转向泵漏油流量的数学模型。

4·Under high frequency usage condition, the internal leakage flow rate of the piston is almost near zero condition.

在高频使用状态下，活塞的内泄漏量几乎接近于零状态。

5·The results showed that the main flow rolled up the leakage flow of the tip clearance and generated the tip leakage vortex.

结果表明：叶顶间隙气流与主流发生卷吸而生成泄漏涡。

6·It was revealed that the effect of depth of a honeycomb seal cell on the leakage flow did not exhibit a linear relationship.

实验研究了蜂窝密封的泄漏特性，发现蜂窝深度对漏气量的影响并不呈线性的规律。

7·The computed conclusion show that the magnitude of tip clearance has close relationship with the intension of tip leakage flow.

根据所测量得到的三维速度，清楚地展现了转子顶部流动的特性，特别是泄漏流对顶部流动的影响。

8·The comparison between the viscous and non-viscous simulations shows that the intensive blockage area is caused by shock-leakage flow interaction.

对粘性与无粘结果的比较显示，由泄漏流所产生的激波后阻塞区是由激波-漏流干扰所致，粘性的作用将削弱其面积和强度。

9·The intensity of rotor wakes was reduced, flow separation on rotor suction side was suppressed and the tip leakage flow was suppressed periodically.

动叶尾迹强度明显减弱，叶背流动分离得到抑制，叶尖泄漏涡也得到了周期性的抑制。

10·Solid particulate conveying characteristic is given by backwards leakage flow rate through intermeshing region and formulated as a conveying efficiency d.

粒子的固体输送特性，在啮合段形成的返向漏流速率是依靠螺杆的设计参数和质量密度。