全部

1·Elastic deformation is an important influential factor of indexing accuracy and loading capacity of end-tooth indexing table with drum tooth.

齿廓弹性变形是影响鼓形齿端齿盘精度和承载能力的重要因素。

2·A neat and secure bed wrap is necessary for proper spooling that will allow the drum to hold the maximum capacity without damaging the string.

整齐平滑和牢固的底缠绕层对于良好的缠绕是必需的，缠绕良好可使卷筒保持最大的容量而不损坏管柱。

3·Drum drying of high degree of mechanization, a larger production capacity, continuous operation.

转筒干燥机械化程度高，生产能力较大，可连续运转。

4·Because of the much thick wall of large capacity boiler drum, the pressed and weld longitudinal seam is used to manufacture the drum shell ring.

由于大容量电站锅炉汽包的壁较厚，所以在汽包筒节制造时常采用压制成两个半圆瓦片再焊接而成的方法。

5·Using the mathematical model of filtration process analyses the production capacity of the continuous revolving drum vacual filter and the filtration efficiency.

应用过滤过程数学模型分析了连续转鼓式真空过滤机的生产能力机理，对过滤效率进行了分析。

6·Large amounts of foams are subject to come into being in the upper part of a coking drum in the delayed coker, which seriously influences the processing capacity and product quality.

在延迟焦化装置上，焦炭塔上部易形成大量的泡沫，严重影响焦化装置处理能力和产品质量。

7·The processing capacity of the holes in pipe is about 40% of the processing capacity of the boiler drum and collecting header in boiler fabrication.

工业锅炉制造中管孔加工量约占锅筒集箱工作量的40%，操作者失误即可能造成该锅筒报废。

8·Single drum type of low thermal efficiency and low production capacity.

单滚筒式的热效率低生产能力小。

9·With the increasing of unit capacity, higher requirements were proposed to control the circulation boiler drum level.

随着机组容量的增大，对亚临界锅炉汽包水位控制提出了更高的要求。

10·The body or a drum of a capacity greater than 60 litres shall, in general, have at least two expanded rolling hoops or alternatively, at least two separate rolling hoops.

容量超过60升的钢桶桶身，通常必须至少有两个扩张式滚箍，或者至少两个分开的滚箍。