全部

1·Jet nozzle is arranged at the root of the fairwater.

喷流孔布置在导流帽的根部。

2·Sets up and chooses the geometric model and mathematic model of Y-jet nozzle;

具体建立和选择了Y型喷嘴的几何模型和数学模型；

3·At the same time, some valuable conclusion for the jet nozzle design have been obtained.

同时也获得了一些对喷管设计极有用的结论。

4·The power of the optimum full-size pulsed jet nozzle is 1.5 times that of the ordinary ones of the same size.

所得最优的全尺寸脉冲喷嘴的功率是同尺寸普通喷嘴的1.5倍。

5·The influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.

模拟中考虑了钻头的切削齿和射流喷嘴对流场的影响。

6·By theoretical calculation and analysis, the necessary liquid pressure and jet nozzle specification are determined.

通过理论计算和分析确定所需压力和喷嘴大小。

7·JETS Series pump is a jet pump or a full lift self-priming pump which is consisted of centrifugal pump and jet nozzle.

jet型泵是由离心泵和喷嘴组成的射流式全扬程自吸泵。

8·Finally, selection methods of viscosity index improver through diesel jet nozzle and long time FZG experiments has been suggested.

提出筛选粘度指数改进剂要经过柴油喷嘴和长时间FZG测试的建议。

9·The flow field calculation and buckling analysis were conducted for the afterburner with a heat shield, flame stabilizer and jet nozzle.

在任意曲线坐标系下对带有横向波纹隔热屏、外冷却通道和尾喷口的涡喷加力燃烧室的三维热态流场进行数值模拟。

10·Recently, with the jet research and development, the non-circle jet nozzle is used widely begin to be accepted because of its advantages.

但随着研究的不断进展，异形喷嘴因为其在某些方面的突出优势已经开始得到越来越广泛的应用。

喷嘴

1·Jet nozzle insufflation technology is used for office Spaces and meeting rooms. By this way, one of the problems mentioned in workshop survey has been solved.

办公空间和会议室内采用喷嘴送风技术，这种技术解决了前面提到的空调不足的问题。

2·Finally, selection methods of viscosity index improver through diesel jet nozzle and long time FZG experiments has been suggested.

提出筛选粘度指数改进剂要经过柴油喷嘴和长时间FZG测试的建议。

3·This paper puts forward such methods as increasing yarn twist, optimizing sizing technology, reducing whiff pressure, and enlarging the chief jet nozzle and the angle of yarn stop pin, etc.

针对弹力竹节织物织造过程中的技术难点，提出了增加纱线捻度、合理上浆工艺、减小喷气压力、增大主喷嘴和止纱销的角度等技术措施。

4·The method of internal combustion with high speed jet nozzle used in the local whole post weld heat treatment of spherical tanks was reviewed.

对球形储罐焊后整体热处理常用的燃油高速喷嘴内燃法进行回顾，并就开始研制的微机自动控制系统做了简介。

5·Because the utility model is provided with the compressed air inlet and the jet nozzle, the energy consumption is low and the silk suction effect is favorable.

与现有技术相比，本实用新型由于设置了压缩空气进口和喷嘴，它能量消耗低、 吸丝效果好。