全部

1·The transverse deformation of the billet was divided into four areas.

研究发现坯料的横向变形分为四个的区域。

2·The cyclic pressing with transverse deformation can improve the densification effect of the billet.

带有间隙的循环压制，可以提高坯料的致密化效果。

3·According to the plate butt welding of A105 steel, the transverse deformation was real-time measured during welding.

通过A105钢的平板对接试验，对焊接过程中焊接横向变形进行实时测量。

4·The method for identification of plastic state of the disk, as well as the approach to obtaining the secant module and transverse deformation coefficient are presented.

提出了轮盘进入塑性状态的鉴别方法、在塑性状态下求出割线模量和横向变形系数的方法等。

5·Analyze the effect of the longitudinal and transverse structure difference of honeycomb on the longitudinal and transverse deformation process and destroy type of BAHP.

分析蜂窝结构在纵横方向上的差异性和面板原材料钎焊后的力学性能对钎焊铝蜂窝板纵向和横向侧压变形过程及破坏形式的影响。

6·The transverse deformation of entiretied and constructed tunnel are both in the elastic limit corruptstate, the solution of the maximum and minimum of the segments'cross-section radius.

装配式、整体式隧道横向变形处于弹性极限破坏状态，管片环横截面极限半径最大值、最小值。

7·This kind of difference in thermal state may result in asymmetric thermal regime in embankment, and underlying soil as well. As a result, possible unevenly transverse deformation may appear.

路基阴阳坡面热状况的差异会导致路基下伏土层温度场的不对称性，由此可能引起路基横向的不均匀变形。

8·Expansion joint: to meet the deformation of foundation, expansion and construction requirements play, prevent play a change in temperature in transverse crack produces.

伸缩缝：为适应地基变形，管身伸缩及施工要求，防止管身在温度变化时产生横向裂缝。

9·In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.

在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。

10·The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.

这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。