全部

1·Used for zero position correction of CNC machine tool and signal division.

用于数控机床零位补正和信号分割。

2·Press the reset key and deletes the zero position error caused by the shift of the zero point in the sensor.

“清零”键，清除传感器因零点飘移而产生的零位误差。

3·Transfer to zero positon when appears fault in double circuit power supply(no action if without zero position);

双路供电故障转向零位（无零位的开关不作）；

4·If the spring machine after each zero zero position is not accurate, it may be the problem of driving parameters.

若是弹簧机每次归零以后零点位置都不准确，那就可能是驱动参数的问题。

5·The apparatus and method thereby compensates for variations in slave cylinder piston 62 zero position due to clutch wear.

该装置和方法从而可以补偿由于离合器磨损导致的工作缸活塞(62)零点位置的变化。

6·The invention is used for angle measurement and angle sensor elements, and can measure the absolute zero position of the measured rotor.

本发明用于角度测量或角度传感器元件，可以测出被测转子的绝 对零位。

7·A single chip computer controlled error compensating system USES digital display of inductosyn to compensate errors of scaled zero position.

介绍一种由单片机控制的误差补偿系统，利用感应同步器数显装置对定尺零位误差进行补偿。

8·This article introduces a new way which applies absolute zero position system of grating digital readout-instrument to measuring large diameter.

介绍了一种采用光栅数显装置的绝对零位系统进行大直径测量的新方法。

9·The paper mainly discusses the principle of two dimension zero position grating and its evaluation index, gives detail discussion of evaluation limit.

本文对二维零位原子光栅的原理，评价指标，评价指标极限的计算，作了详细介绍。

10·The joint zero position deviations of joint type CMM, which result from assembly technology errors, have an enormous influence on the pose errors of probe end.

关节式坐标测量机的关节零位偏差是由装配工艺误差引起的，对测头末端的空间位姿误差影响极大。