全部

1·When using the machine frame in the fruit harvested between.

在用机器收割时架在果树之间。

2·Fluency strips on the machine frame is used to accept and place medicine.

所述机架上的流利条接受并放置药品。

3·The machine for the entire machine frame is finished in a single process to ensure high accuracy.

同时整个机架采用一次性整体加工，确保机架高精度要求。

4·The forked wedge-shaped plate is fixed on a machine frame to replace a seed pushing rubber strip.

将此分叉楔形板固定在机架上，取代刮种橡胶条。

5·With the super-large diameter main shaft and the heavy main machine frame, the equipment is tight and durable;

单缸液压圆锥破碎机超大直径主轴重型化主机架使设备坚固耐用；

6·Remote mounted drive motors reduce moving mass for faster setting, and dissipate heat away from the machine frame.

电机远程放置减少了移动质量，提高了速度，也避免了电机发热对机器性能的影响。

7·The transmission mechanism is composed of a guiding ring which is welded on a machine frame, and four rods crank mechanism.

该传动机构由焊接在机架上的导向环和四杆曲柄机构组成。

8·To validate feasibility of chassis machine frame design, intensity analysis method of corn combine machine frame is studied.

研究了玉米联合收割机机架强度分析的方法，验证了底盘机架设计的可行性。

9·Through the control of hydraulic equipment, can work on the mobile machine frame, convenient manual installation work-piece.

通过专用的液压设备控制，能上下移动工装架，方便人工安装镀件。

10·The mechanical analysis and design were carried out on filter chamber shell, heating jacket and machine frame of melt filter.

对熔体过滤器的滤室壳体、加热夹套及机架进行机械分析和设计。

机架

1·The mechanical analysis and design were carried out on filter chamber shell, heating jacket and machine frame of melt filter.

对熔体过滤器的滤室壳体、加热夹套及机架进行机械分析和设计。

2·A front guide device is fixed on machine frame, and a back guide device can do parallel motion along the shaft line direction of the saw shaft.

圆锯片与锯轴通过花键连接，前导向装置固定在机架上，后导向装置可沿锯轴轴线方向平行移动。

3·The transmission mechanism is composed of a guiding ring which is welded on a machine frame, and four rods crank mechanism.

该传动机构由焊接在机架上的导向环和四杆曲柄机构组成。

4·The machine frame can install various agricultural implements, the functions are multiple, the utilizing rate is high, and the lay-up period is short.

这种机架可以安装多种农机具，功能多、利用率高、闲置期短。

5·The overload protection device is installed on a fixed circular table for the annular gear of the speed reducer and the position limiting device is installed on the lower part of a machine frame.

过载保护装置安装在减速机固定内齿轮圆台上、限位装置安装在机架下部。