全部

1·This connection may also be done using a karabiner – with a breaking load of at least 2000 kg.

也可使用一个弹簧钩将两绳连接在一起，钩子受力最少在2000KG。

2·Parallel laid, with a large metallic cross-section, high breaking load relative to the rope diameter.

线接触结构，金属面积比较高，具有较高的破断载荷。

3·Effects of Sr 2+ on body weight, body length, AKP activity of serum, calcium content of urine and breaking load of bended femur for rats were not found.

尚未发现锶对动物体重、体长、血清AKP活性、尿钙水平以及股骨弯曲断裂载荷的影响。

4·Client mode performance can vary with network load, even to the point of breaking the connection.

客户机模式性能可能因网络负载，甚至断开连接的点的不同而不同。

5·Load testing to the point of breaking the server(s) lets you know the performance envelope of you systems.

将负载加到最大，直到服务器运行中止，这样做可以发现系统的性能极限。

6·When the applied load exceeds the limit strength of the material as a result of parts breaking overload fracture.

当外加载荷超过材料强度极限而造成零件断裂称为过载断裂。

7·Those traditional method are confronted with several problems: having difficulty with conquering dynamic load in tapping and leading to thread breaking, block, abrasion and low machining quality.

这些传统加工方法存在的问题有：难以克服攻丝过程中的动态载荷，导致丝锥折断、阻塞、磨损等，同时加工质量不高。

8·The delayed elastic deformation stage came later, the bend deflection increased more quickly, and breaking life shortened with the increase of the prolongation of the maximum load hold time.

随着最大载荷保持时间的增加，塑木复合材料进入延迟弹性变形阶段越晚，弯曲挠度增加越快，断裂寿命降低。

9·Used for testing indexes of single fiber, such as breaking tenacity, elongation at break, load at specified elongation, elongation at specified load, creep, etc.

用于测定各种单纤维的断裂强力、裂伸长率、伸长负荷、负荷伸长、变等性能指标。

10·Too heavy a load will strain the rope to its breaking point.

负载过重会把绳子拉紧到崩断的地步。