全部

1·The convection heat transfer coefficient of coolant within the grinding zone has been estimated using hydrodynamic and thermal modeling.

磨削区冷却液的热对流系数已由流体动力学和传热学模型估算得到。

2·Local convection heat transfer coefficient decreases along the micro-tube by 12.5% for the influence of thermal conductivity of liquid nitrogen.

微通道中局部对流换热系数受到液氮导热系数变化的影响沿管程逐渐下降约12.5%。

3·Try to make the cold, hot water flow passage of convection heat transfer coefficient is equal or close to, to get the best heat transfer effect.

尽量使冷、热水流道内的对流换热系数相等或接近，从而得到最佳的传热效果。

4·This makes the convective heat transfer coefficient of the stainless steel tube is larger than that of the convection heat transfer coefficient of the copper tube.

这就使不锈钢管的对流放热系数比铜管的对流放热系数大。

5·As a result, heat dissipating capacity, metal thermal intensity and free convection heat transfer coefficient of the longitudinal closed finned tube are higher than those of the open finned tube.

结果表明，封闭式纵向翅片管的散热量、金属热强度以及自然对流换热系数都要高于开放式翅片管。

6·Heat-transfer coefficient, heat resistivity, heat conductivity, heat exchanger, heating convection, heat conduction, heat radiation, heat convection exchange.

传热系数，热阻率，导热系数，换热器，热对流，热传导，热辐射，对流传热。

7·The coefficient of convection heat transfer increases with increasing the particle diameters.

对流换热系数随着颗粒直径的增大而增大。

8·Method and formulae for calculating the mean forced convection heat-transfer coefficient of the blade surface, as well as for the blade passage's bottom wall, are introduced.

介绍了汽轮机动叶片叶身平均对流换热表面传热系数和叶片流道下壁面对流换热表面传热系数的计算方法和计算公式。

9·CNVCOF specifies the convection coefficient which is used in determining convection heat transfer.

CNVCOF定义了用于确定对流热传导的对流系数。

10·The study is about the coefficient of heat transfer of convection in the stage of Constant rate of drying with the ways of dimensional analysis and the experiments.

应用因次分析和实验测定相结合的方法，对恒速干燥阶段的对流传热系数进行了研究。