全部

1·The tensile strength of the ionomers increases and the ultimate elongation decreases with the increase of sulfonate content.

随着磺酸盐含量的增加，离聚体的拉伸强度增大，伸长率下降。

2·This means that the design will usually have only published values of yield strength, ultimate strength, and percentage elongation.

这就是说，设计人员通常只能利用那些公开发表的屈服强度、极限强度和延伸率等数据资料。

3·According to the testing and studying, ultimate strength, elongation and shrinkage on cross section of two kinds of steel bar were determined.

通过测试研究还得到两种钢筋的极限强度、延伸率和断面收缩率等其他高温力学性能参数。

4·The collagen protein level of acellular vascular matrix was evaluated, the elongation ratio and ultimate stress were assayed as well.

测定脱细胞血管基质中胶原蛋白含量，检测血管脱细胞血管基质的伸长比、极限应力。

5·And the ultimate tensile strength and elongation of low frequency electromagnetic cast billets are greatly increased.

相对于常规直接水冷铸造，低频电磁铸造提高铸态拉伸强度极限和延伸率。

6·Column 5, the elongation at ultimate stress, in percentage gives an indication of the 'Toughness of the material.

第5栏，伸长率在极限应力项，在百分比给出了一个说明'韧性的物质。

7·The results indicate that the ultimate tensile strength of AM60B increases prominently with the increasing of RE, the yield strength and elongation are also improved.

结果表明，AM60B的抗拉强度随着RE的增加有显著提高，屈服强度、伸长率也有所提高。

8·The SPPT improves the ultimate tensile strength by 3.5%, and elongation to failure by 25.7% .

超塑预处理使合金抗拉强度提高不很明显，仅为3.5%，而塑性提高了25.7%。

9·The results show that the ultimate tensile strength and yield strength of the alloys rise but the total elongation decreases as the temperature of quench medium drops.

结果表明：随淬火介质温度的降低，淬火降温速率提高，合金的强度增加，塑性下降；

10·The ultimate tensile strength and elongation of extrusion bar after forging process was much higher than that of the direct extrusion bar.

先锻后挤工艺棒材最终抗拉强度和断后延伸率高于直接挤压棒材。