全部

1·The safety of angular contact ball bearing in CMG under random vibration is investigated.

研究CMG中角接触球轴承在随机振动下的安全性。

2·Numerical analysis of the deformation and angle of contact of the high speed-angular contact ball bearing;

角接触球轴承作为高速电主轴的核心部件，其性能直接影响电主轴的性能。

3·Single row angular contact ball bearings in spindle bearing design must not be exposed to any misalignments.

单列角接触球轴承，主轴轴承设计不能暴露任何偏差。

4·Our products include deep groove ball bearing, angular contact ball bearing, taper roller bearing, and needle bearing;

本公司生产深沟球轴承、角接触轴承、圆锥滚子轴承、滚针轴承；

5·Single row angular contact ball bearing with two piece inner ring has complex construction, long design cycle, great difficulty in processing.

双半内圈四点接触球轴承结构复杂、设计周期长、加工难度大。

6·Under such conditions the balls contact the inner and outer rings only at one point, as in an axially loaded single-row angular contact ball bearing.

在这种情况下接触球只在某个时候，内圈和外圈，作为一个受压单列角接触球轴承。

7·Most of gyroscope bearings are precious angular contact ball bearings, the precision and life of gyroscope is dependant on the performance of bearing.

陀螺马达轴承大部分是精密角接触球轴承，轴承的性能决定着陀螺马达的寿命和精度。

8·The twin tandem, a four-row angular contact ball bearing, replaces conventional tapered roller bearings in wheel bearings and contributes significantly to saving fuel.

双串联，一个四列角接触球轴承，取代传统的圆锥滚子轴承在车轮轴承，大大节省燃料。

9·Angular contact ball bearings transfer the loads acting on the bearing at a certain Angle, the so - called contact Angle from the shaft centre line (see sketch below).

角接触球轴承，轴承的负荷，在一定的角度，-所谓的“接触”轴心线(参见下图)的角度转移。

10·The axial fixed position preload is applied to middle ring of the shaft, the axial rigidity of the angular contact ball bearing is obtained by the impulse excitation tests.

对转台中环主轴施加轴向定位预紧力，通过脉冲激励法试验得到角接触球轴承的轴向刚度，试验结果与理论结果吻合较好，为转台研制中各轴系预紧量的控制提供了理论和实验依据。