全部

1·It's very important that accurate position of the edge of start stop shear to high speed wire mill production. Shear would run by accurate controlled.

剪刃位置控制是高速线材生产中所使用的启停式飞剪的关键控制环节，其控制精度的高低直接影响到飞剪的正常工作。

2·This paper analyses the characters of double two high wire mill in China and put forward the design methob and program frame drawing of CARD of this mill.

分析了我国复二重式线材轧机的特点，提出了针对该轧机特点的计算机辅助孔型设计的设计思想、程序框图等。

3·The technique reformation of double due wire mill for rolling without reheating and hot delivery and hot charge in Xingtai Iron and Steel Co. are introduced.

介绍了邢钢轧钢厂复二重轧机实施连铸坯一火成材、热送热装技术的改造过程。

4·The optimization design for the groove system in double duo wire mill by dynamic programming were briefed according to minimum total rolling energy consumption.

阐述以动态规划法按最小轧制能耗时复二重线材轧机孔型系统进行优化设计的方法。

5·The characteristic of roll pass system in high speed wire mill was introduced, moreover, the deformation parameters and variation regular pattern of the roll pass were analyzed.

介绍高速线材孔型系统的特点，并对其变形参数及其变化规律进行分析。

6·The result shows that production of high strength screw bars is reasonable by the control rolling and control cooling process on high-speed wire mill with the capacity of low temperature rolling.

结果表明，在具有低温轧制能力的高线轧机生产线上，采用控轧控冷工艺生产高强度钢筋是可行的。

7·When taking compact mill as rough stands of high speed wire mill, the tensile force for biting and stable rolling are different, resulting in the dimension variation at end and middle part of product.

以紧凑式轧机作为高速线材粗轧机组时，由于粗轧中各机架咬入和稳态轧制的张力不同，致使坯料出口头尾尺寸波动较大。

8·The advanced development process flow of converter-small billet continuous casting machine-high speed wire rod mill is adopted in developing EH14 wire rod for weld.

青钢应用“转炉-小方坯连铸机-高速线材轧机”工艺流程试制EH14焊接用钢盘条。

9·The method and example of pass optimization design of high speed wire rod finishing mill by dynamic programming with minimum total tension coefficient are described.

阐述了以动态规划法按最小总张力系数对高速线材轧机精轧机组孔型进行优化设计的方法与实例。

10·The paper introduces the course of production and development on free cutting steel wire at High Speed Wire Rod Mill. The problems are analyzed during production and the measures have been taken.

简述了高线厂易切削钢丝的生产开发过程，分析了生产中出现的问题，以及采取的措施。