全部

1·The questions of lacking test power supply, unfittness of compensation capacitor specification are all solved.

该方法可解决试验电源不足、补偿电容器规格不适合的问题。

2·In order to do well the grid reactive power compensation, reliable operation of reactive power compensation capacitor must be assured.

为了做好电网的无功补偿，必须保证补偿电容器的安全可靠运行。

3·The starting circuit will be removed by a contactor and the capacitor will be converted to a reactive compensation capacitor after starting.

启动完成后利用接触器将启动电路切除，将电容器切换为无功补偿电容的低压开关柜的设计原理。

4·C will cause harmonic flow reactive (power factor) compensation capacitor current increase significantly, resulting capacitor will soon be put into operation in damage.

c谐波将引起流过无功(功率因数)补偿电容器的电流显著增加，造成电容器投入运行不久就损坏。

5·If all capacitors are located in single spot of line, in the term of improving power-angle stability, then it is the best option that compensation capacitor is placed at the middle of line.

从提高功角稳定性考虑，在单点补偿时，最佳补偿方式是将电容器安装在线路中点。

6·Capacitor group is switched through accuracy calculation to form closed-loop management system of reactive compensation.

发、供、配电网投切电容器组应通过精确计算，形成无功补偿的闭环管理系统。

7·Its important to study the effect of series capacitor compensation on line protection.

研究串联电容补偿对线路保护的影响具有重要意义。

8·Fixed compensation and random auto-compensation use power capacitor to compensate.

采用电力电容器进行补偿有固定补偿和随机自动补偿。

9·The problem of voltage balance was solved by a compensation for the difference of the output voltage of capacitor.

通过针对输出电容的电压差值的直流分量进行补偿，解决了电压平衡问题。

10·The technique of series capacitor compensation had been applied recently to improve transmission ability of power grid.

近年来，为了提高电网的输送能力，串联电容补偿技术被广泛采用。