全部

1·The mixing temperature of the flow is gained from the heat balance equation.

通过建立热平衡方程，求出流体混合温度。

2·The influence of the mixing temperature, mixer and processing technology on the dispersibility of nano-ZnO in BR compound was investigated.

研究不同的加工温度、混炼设备、加工工艺对纳米氧化锌在BR胶料中分散性的影响。

3·The effects of mixing temperature, mixing time, crosslinking agent systems and high temperature repeated mixing on the mechanical properties of SBR/PE/PVC blends were studied.

介绍了开炼法制备SBR/PE/PVC多元共混体的共混温度、共混时间、交联体系及共混体高温返炼对材料力学性能的影响。

4·The influence of the mixing temperature and blending ratio on the mechanical properties of CR/PVC blend was investigated and the microstructure of CR/PVC blend was observed on TEM.

研究了混炼温度和橡塑共混比对CR/PVC共混物力学性能的影响，并通过电镜观察CR/PVC共混物的微观结构。

5·At the same time, the lower mixing temperature and compacting temperature of WMA has significantly promote the project quality and construction in the cold moisture environment of tunnel.

同时，在隧道阴冷潮湿的特殊环境条件下施工，WMA较低的拌和压实温度对于保证工程质量意义重大。

6·The result shows, the ester exchange reaction did take place in PC/PET melting blend system, the extent of exchange reaction depends on content of the components, mixing temperature and mixing time.

结果表明，PC/PET共混体系在熔融过程中有酯交换反应发生，反应程度与组分含量、熔融温度和共混时间有关。

7·That is, if we take the derivative G of delta G of mixing the partial derivative with respect to pressure, at constant temperature, of course, there's no explicit pressure dependence.

就是说，如果我们对,混合物的△,对压强求导，温度不变，当然，不是对压强的显函数。

8·In general, the Lord salt concentration, temperature increase coating, and under the condition of mixing, can allow the more current density.

一般情况下﹐主盐浓度增大﹐镀层温度升高﹐以及有搅拌的条件下﹐可以允许采用较大的电流密度。

9·Valves for reducing point of discharge temperature by mixing cold and hot water in branch water lines are available.

这种阀门能够通过调节冷热水的混合比例来降低排放出的热水的温度。

10·Assuming a given temperature rise, varying ocean depth and therefore differing rates of mixing and consequent expansion will lead to considerable differences in sea level rise.

假设温度上升，不同的海水深度引起的不同的混合和随之而来的膨胀速度，引起显著不同的海平面上升量。