全部

1·Edge gate or sprue gate requiring secondary operation acceptable.

边缘型或直入型水口都可以接受。

2·Combine a traditional 4 cavity edge gate and a 4 cavities reverse gate mould which help to double the moulding capacity and reduce production cost.

将一个标准四模腔大水口模具与一个四模腔倒转大水口模具结合成为一套可于同一大小的注塑机，生产量可增加一倍的层板模具，并且可降低成本。

3·A gate is merely a message that is illustrated with one end connected to the sequence diagram's frame's edge and the other end connected to a lifeline.

一个门只是一个消息，图形表示为一端连接序列图的框架边缘，另一端连接到生命线。

4·The schottky diode bypasses the gate resistor in the gate discharge path, so that there is no falling edge delay. The delay at the rising edge adds dead time.

为了增加更多的死区时间，补偿功率管的切换瞬间短暂延时，增加了一个肖特基二极管，与栅极电阻。

5·In the current domestic and international study, the core node and the edge node of the OBS experimental platform tend to be implemented by the flexible, low-cost FPGA (field programmable gate array).

在目前国内外的研究中，OBS实验平台的核心节点和边缘节点都倾向使用灵活，低成本的FPGA(现场可编程门阵列)来实现。

6·The design principle of the gate equivalent Al is proposed and the way to solve the turning off edge effect is given.

给出了门极等位铝条的设计原则；提出了解决MCT关断时边缘效应的方法。

7·First, there is only one overlapped area between the gate finger and the mesa edge in closed gate devices.

封闭式结构的闸极只会有一处跨过主动区边缘。

8·Adopting gate resistance increased the rise time of edge, and adopting low output resistance of driver reduced the fall time.

通过低驱动内阻对栅极电容电荷的快速泄放提高脉冲后沿的下降速度。

9·The ECL OR-AND-gate can simplify a generalized ECL circuits structures, for example, an ECL double-edge-triggered D flip-flop.

作为常规ECL门的补充类型，常可用于简化一般ECL电路结构，例如ECL双边沿D触发器。