全部

1·Shear modulus and damping ratio change very little.

动剪切模量与阻尼比的变化比较小。

2·Contrast quivalent dynamic shear modulus and damping ratio of different soil types.

最后分析了同类土静、动强度参数之间的比例关系；

3·This paper presents a method to identify transverse shear modulus for composite materials.

本文提出一种测试复合材料横向剪切弹性模量的参数识别方法。

4·The values of the dynamic shear modulus and the damping factor are close to those of sandy soil.

动剪切模量和阻尼特性接近于砂性土。影响阻尼特性最明显的因素是剪应变和周压力。

5·The spring element stiffness is related to pre yield shear modulus of MR fluid and accumulator stiffness.

该弹簧单元与磁流变液屈服前区的初始剪切模量和蓄能器的刚度等有关。

6·The straightforward procedures to achieve shear modulus of colloform and maximum shear stress are specified.

提出了求解胶体剪切模量和最大剪应力的简单方法。

7·A model is proposed for predicting the effective longitudinal shear modulus of fiber reinforced composite materials.

本文给出一个计算单向纤维增强复合材料纵向剪切模量的模型。

8·Elastic shear strain in shear band was dependent on shear elastic modulus, damage variable and residual shear modulus.

考虑刚度劣化后，剪切带的弹性应变由弹性剪切模量、损伤变量及残余剪切模量确定。

9·This article describes the improved shear modulus can increase the profiled rubber bearing, and puts forward a new bearing.

本文介绍了改进后能提高抗剪弹性模量的异型板式橡胶支座，并在此基础上提出新型支座。

10·The shear stress sharply rises at the ends of the piezoelectric as the shear modulus increasing or the thickness decreasing.

随着粘贴层的切变模量的增加或其厚度的减小，切应力在靠近压电致动器端部区域迅速增大。