全部

1·The effect of hot bending and heat treatment thermal cycles on the mechanical properties of X80 grade steel pipe was evaluated.

通过焊接热模拟试验和冲击韧性试验，研究了不同预热温度对X80级管线钢组织性能的影响。

2·B. in a later chapter, hollow plate the smallest bending radius is 175 times of its thickness, can only cold bending, hot bending.

在后面章节中，中空板的最小弯曲半径是其厚度的175倍，只可以冷弯，不能热弯。

3·Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.

采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。

4·Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热弯玻璃。

5·The rotating bending fatigue strength is the criterion of resistance to propagation of hot cracks.

旋转弯曲疲劳强度是抗裂纹扩展能力的判据。

6·When a wire is broken by bending it back and forth rapidly, some of the work is transformed into heat and the wire gets hot.

当把导线快速地(通过)来回弯曲折断时，部分功就转换成热，所以导线变热。

7·The main products include: hot-bending vat glass sheet, small set of vats and aquarium chests.

现主要产品为：热弯缸片、小弯系列套缸及水族箱系列。

8·In general the major roll forging processes consisted of blanking, heating, roll forming, locally sizing, side cutting, bending and integrally hot correcting.

主要工艺流程为：下料、加热、成型辊银、局部整形、切边、弯曲、整体热校正。

9·An analytical solution for elastoplastic bending of a hot free beam due to inhomogeneous cooling process is presented in this paper.

针对一个被均匀加热的矩形截面梁由于不均匀的冷却过程所引起的弯曲变形问题，本文给出了一个热弹塑性分析解。

10·The profile, internal stress, cold - bending cracks and surface flaws of the hot strip have been analyzed, and the corresponding strategics and resolutions are also preferred, In order to improve the.

从宽带钢板形、内应力、冷弯裂纹及板带表面缺陷等几个方面进行了分析，并提出了相应的对策和解决办法。