全部

1·The inclusions trapped in line defect usually have different volumes.

而线缺陷型包裹体体积变化较大；

2·It consists of two line defect waveguides and two point defect micro-cavities.

这个器件由两个线缺陷波导和两个点缺陷微腔构成。

3·The purpose of this paper is to study the dot defect and line defect in photonic crystal, waveguide and demultiplexer.

本文主要研究了光子晶体中的点缺陷和线缺陷，以及由缺陷构成的光子晶体波导和分频器。

4·Based on the research of existing rules, a new method for the FPC line defect recognition is advanced, named multi-template reference contrast.

该文针对FPC线路的瑕疵识别问题， 在研究已有瑕疵识别规则的基础上， 设计了一种多模板参考比对法。

5·The inner spiral copper tube produced by extrusion-rolling process has a kind of special line defect, which influences the production yield remarkably.

采用挤轧法生产内螺纹铜管时易出现一种特有的线形缺陷，显著影响内螺纹铜管的成材率。

6·Compared to the natural samples, secondary inclusions trapped in line defect mode are the most common ones and also the most common ones in inclusion analysis.

结合天然样品对比，线缺陷型次生包裹体是最常见的，也是分析中用到最多的包裹体类型。

7·Based on the defect analysis of the PLC coal conveying control system in power plant, this paper puts forward a new method for on line defect judgement of the control system.

在对PLC网络控制的火电厂输煤控制系统的故障分析基础上，提出了一种在线判别系统故障的新方法。

8·Because the inclusions trapped in point defect and the line defect modes can be easily healed during the growth of mineral crystals, most inclusions formed in these two modes.

由于矿物晶体生长过程中点缺陷和线缺陷容易愈合，多数包裹体以这两种模式形成。

9·X-ray inspection system, which adopts technology of automated X-ray inspection (AXI), has provided an effective way of on-line defect-detecting which can ensure PCB's quality.

光检查机，利用自动X射线检测（AXI）技术，为PCB生产提供了很好的在线检测手段，从而有效地保证了PCB的生产质量。

10·In this paper, on the research background of defect inspection system in the production of fluoride plastic film, it firstly discusses the design of on-line defect inspection system.

本论文以氟塑料薄膜生产中的疵点检测系统为研究背景，首先论述了基于机器视觉的在线疵点检测系统的总体设计。