全部

1·An air nozzle can be used in any instance where compressed air is required for an application.

需要压缩空气的应用都可使用空气喷嘴。

2·When the utility model is used, the air die frame can be inflated through an air nozzle, and then, the air die football shelf is fixed on the lawn by the fixed pins.

用时可通过气嘴对气模框架充气，然后由固定销将气模足球架固定在草坪上。

3·Water flowed into the air intake hose of the vehicle's engine, said investigators, who speculated the air induction nozzle might have been attached too low.

调查人员说，水流入该车辆发动机的进气软管，他们推测空气吸入喷头可能被装得太低。

4·Otherwise, for certain models of printers, the printer can not be implemented blocks operation, the nozzle exposed in the air will lead to dry ink dry.

否则对于某些型号的打印机，打印机无法执行盖帽操作，喷嘴暴露干空气中会导致墨水干涸。

5·Clean: 12 nozzles at one time. it can clean all types of nozzles by using different nozzle trays. Compressed air blow to make nozzles dray.

清洗：机器全自动清洗，每次可清洗12个吸嘴，不同型号的吸嘴配备不同的治具托盘，任何型号贴片机吸嘴都可以清洗，清洗以后在用压缩空气干燥。

6·With moist air as the radical source, the influence of nozzle electrode's OD on both corona discharge and NO oxidation have been studied.

以湿空气为自由基源物质，研究电极喷嘴外径变化对电晕放电特性、NO电晕氧化过程的影响。

7·The SW Sidewinder Flat Flame burner is a nozzle mix excess air burner designed for radiation heating.

SW钙土平焰炉头是一款烧嘴混合过量空气炉头，辐射加热设计。

8·The numerical simulation of the injector of atmospheric gas burner is carried out using software FLUENT, and the relationship between nozzle position and primary air coefficient is obtained.

采用FLUENT软件对大气式燃气燃烧器的引射器进行数值模拟，得出喷嘴位置与一次空气系数的关系。

9·Results show that reducing the apparatus size and increasing the hot air flux can effectively increase immersed nozzle's preheating temperature and improve the thermal gradient on the nozzle neck.

结果表明，缩小烘烤箱的尺寸，加大热空气的流量，可以有效地提高水口的预热温度，改善水口颈部的温度梯度。

10·In this paper, we analysed supersonic speed flow of oil steam with using Air Dynamics and required the flow law of oil steam at the edge of the nozzle end.

本文用气体动力学分析了油蒸汽的超音速流动，得到扩散泵喷嘴出口油蒸汽的流动规律。