全部

1·Compared with the plastic deformation property of the polycrystal copper wire, the SCCW is better;

同种技术生产的单晶和多晶两种线材相比，单晶铜线材的塑性更为优异。

2·Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.

采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。

3·The constitutive models of monocrystal and polycrystal MT materials are presented in this dissertation.

本文的研究内容给出了单晶和多晶马氏体相变材料的本构响应模型。

4·The nanometer tetragonal polycrystal zirconia powder was prepared by the super alkaline method at low temperature.

利用低温超强碱法制备出了纳米四方多晶氧化锆粉体。

5·Numerical calculation shows that the constitutive model given here can well simulate the behavior of polycrystal MT.

数值计算结果表明该本构模型能较好模拟多晶材料的马氏体相变本构曲线形态。

6·Kim said, We will be able to use a low-temperature polycrystal silicon with the sixth-generation size glass substrate.

Kim称：“我们现在已经可以在6G尺寸级别的基板上应用低温多晶硅技术。

7·The Nanbo Company which is located in Yichang is the maximal high-purity polycrystal silicon producing enterprise of China.

位于宜昌市境内南玻公司是全国最大的高纯多晶硅材料生产企业。

8·From the viewpoint of multi-grain structure of material, a polycrystal model is founded based on the crystal plasticity theory.

从材料的多晶体结构角度，基于晶体塑性变形理论建立了多晶体模型。

9·We consider that damage layers on near perfect crystal consist of polycrystal layer, Mosaic structure layer and distorted layer.

我们认为，近完整晶体的切割损伤层是由多晶层、嵌镶结构层和畸变层组成。

10·This article introduces production situation, market demands and prospect of development to polycrystal-line - silicon and its derivative.

本文主要介绍了多晶硅及其衍生物的生产现状，市场需求及发展前景。

多晶体

1·Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.

采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。

2·Numerical simulation of multi point bending process of strip under different loading paths is dealt with the finite element polycrystal model.

采用有限元多晶体模型对无模多点成形条件下不同加载方式的板条多点弯曲成形过程进行了数值模拟。

3·From the viewpoint of multi-grain structure of material, a polycrystal model is founded based on the crystal plasticity theory.

从材料的多晶体结构角度，基于晶体塑性变形理论建立了多晶体模型。