全部

1·Why shall harden steel be annealed ?

淬火钢为什么要退火呢?。

2·The samples were annealed at different temperature.

在不同温度下对样品进行热处理。

3·Annealed film structure is looser than as-deposited one.

退火态的膜层结构比沉积态的疏松。

4·To compensate for annealed wire diameter necking problem.

为了补偿退火线径变细的问题。

5·But effect solution La on annealed structures of steel is weakly.

但对退火组织的铁素体晶粒影响不大。

6·When ordinary annealed glass breaks, it poses considerable danger.

当普通退火玻璃打破，它构成相当大的危险。

7·A well-annealed material may require many days of contact with water.

一个经过很好退火的材料需要与水接触许多天。

8·The samples were annealed under different electrical current density.

样品在不同电流密度下进行了处理。

9·The films were annealed at different temperature and for different time.

在不同温度下，用不同时间对薄膜进行了循环退火。

10·The washer is usually made of annealed nickel and has a highly polished surface.

垫圈通常用退火镍制成，具有非常光滑的表面。

退火

1·Lead or annealed copper washers are most often used in fluorine and other reactive fluoride service.

铅或退火铜垫圈最经常用于氟和其它活泼氟化物设施。

2·The washer is usually made of annealed nickel and has a highly polished surface.

垫圈通常用退火镍制成，具有非常光滑的表面。

3·Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state.

高于此点，由于超过共析点钢完全由珠光体和退火状态的渗碳体组成，硬度增加并不多。

4·Why shall harden steel be annealed ?

淬火钢为什么要退火呢?。

5·It also showed that the optical absorption edge of the annealed film appeared shifted towards the longer wavelength side and the band gap decreased by 0.

光学性质显示退火处理的薄膜吸收边缘明显的向长波的方向移动，发生红移现象，而且禁带宽度减少了0。