全部

1·The method supplys grinding of deep blind hole a economic and reliable technology.

该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。

2·The small blind hole method is used for the measurement of residual stress inside T joint.

采用盲孔法测定了丁字焊缝的残余应力。

3·This machine mould replacement can system standard bricks, blind hole brick and other alien products.

本机更换模具可制标砖、盲孔砖及其它异型制品。

4·On the basis of the conclusion, the influence of the depth and diameter of blind hole on the gun body strength was studied.

并在此基础上，研究了盲孔直径及深度对射孔枪强度的影响。

5·Retaining mechanism, with a tiny stroke clearance, solves the problem of high precision machining on small pieces and blind hole pieces.

冲程间隙极小的锁紧机构更能解决短小零件及盲孔零件等高精度加工难题。

6·At the end, some general instructions for the process design of flash die forging of axisymmetric gear blanks with blind hole were suggested.

最后，给出带盲孔的轴对称锻件的闭式模锻工艺设计的一般性指针。

7·For the flexible stress transfer system, we present an application for patent which is a CIP device for molding a ceramic tube with blind hole.

针对柔性应力传递系统，申请了“一种带盲孔的陶瓷管冷等静压成型装置”的专利(已受理)。

8·This paper introduces the criterion of selecting pump, detonation mode, principle and action of inner blind hole perforator and tubing pump joint technology.

介绍了内盲孔射孔器与管式泵联作技术的选泵标准、起爆方式、原理和流程以及内盲孔射孔器的研制。

9·Thanks to its own characteristics, such as blind hole, lumen groove finishing, traditional finishing have some limits for surface which are difficult to machine.

传统的光整加工方法，因其工艺特点，使用时都有一定的局限性，对内腔沟槽、盲孔等难以加工。

10·The main cylinder of hydraulic press is ground by self-made belt grinding device. The method supplys grinding of deep blind hole a economic and reliable technology.

本文阐述了利用自制的砂带磨削装置，对液压机主缸内孔行进磨削加工。该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。