全部

1·Remove nut securing pedal shaft in support bracket.

拆卸支撑托架上连接踏板轴的螺帽。

2·Trough Advance support bracket face Applications Research;

顺槽； 超前支护支架； 工作面； 应用； 研究；

3·Let's put the support bracket to the rack and tighten it up with proper screws.

我们把承重支架安到机架上，再用适当的螺丝把它拧紧。

4·The basic structure and their parameters, composite of climbing support bracket, installation and climbing process are introduced in detail.

详细介绍了该起重机的基本构造及相关参数、爬升支承架组成、安装流程和爬升流程。

5·Each shoe base can be driven by each support bracket and each swinging arm to rotate in the mode of winding each legging outer shell to rapidly realize sliding and walking conversion.

鞋座可在支架和摆臂的带动下绕绑腿外壳转动，快速实现滑行与行走的转变。

6·A user has the anti dazzle board bracket hanging on the side of the fence, anti dazzle board arranged on the support after a strong wind blown steel guardrail board three kilometers.

有一用户曾把防眩板支架挂在一侧护栏上，防眩板按装到支架上，一场大风过后，钢护栏板被吹倒三公里。

7·The precision of the support bearing of the horizontal milling machine bracket affects the rotation precision of the cutter rod, thus affecting the dimension precision and cylindricity of the hole.

卧式铣床支架的支承轴承的精度会影响刀杆的回转精度，从而影响孔的尺寸精度和圆柱度。

8·Bracket: it gets two pivots to contact upper support plate, mid-support plate and lower support plate and fix the distance 25mm.

支架：有两根枢轴联结上承板、中承板和下承板之间的距离籍支承套固定为25毫米。

9·If a designer were to design a bracket to support 100 lb. when it should have been figured for 1000 lb., failure would be forthcoming.

如果设计者所设计的托架能支撑100磅，当它被设计为1000磅时，事故一定会出现。

10·A lock assembly is affixed to the support tube and the base of the second bracket.

锁集贴在支持管和第二支架基础。