全部

1·For brittle state the inertia force must be considered.

对于脆性状态，必须考虑惯性力的影响。

2·Three directions equivalent inertia force of the whole mechanism oscillates severely.

整个机构各向等效惯性力均有振荡。

3·Give an example of mini van door lock, analyze the inertia force on door lock when it runs.

以某微型客车门锁为例，分析了门锁在汽车行驶过程中所承受的惯性力。

4·The effects of eccentric mass, damping, inertia force and gravity on the vibration amplitude were analyze.

在此基础上，分析了质量偏心、阻尼、惯性力和重力对振幅的影响。

5·First, the distribution of Coriolis inertia force is formulated in the axisymmetric solid with gyroscopic effect.

首先，推导了轴对称体中哥氏惯性力的分布公式。

6·It is a easy, practical, and effective method, and can be extended to the calculation of inertia force and inertia moment balance.

方法简单实用，可推广应用于其它机构惯性力平衡和惯性力矩平衡的优化计算中。

7·The deformation of the structure changes very fast as the loads change with time. The effect of the inertia force can't be ignored.

由于外加的载荷随时间变化得很快，结构的变形也变化得很快，惯性力的作用将不可忽略。

8·If the flood wave is deformed on its way of propagation, there exists acceleration term or inertia force that equals to internal friction.

波体在传播途中变形，则有加速项或惯性力，内摩阻力等于惯性力。

9·Inertia force of each stroke can be 'calculated through 3 - dimension simulation calculation when flyweight of speed governor is designed.

在设计调速器飞块部件时，通过三维建模方便地计算出了其在各行程段时的支持力。

10·The vibration and noise of the pump. 7 because the rotary inertia force component inside the pump is low, can work under high rotation speed.

⑥泵的振动和噪声极小。 ⑦因为泵内的回转部件惯性力较低，可在高转速下工作。

惯性力

1·In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.

在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。

2·For brittle state the inertia force must be considered.

对于脆性状态，必须考虑惯性力的影响。

3·The deformation of the structure changes very fast as the loads change with time. The effect of the inertia force can't be ignored.

由于外加的载荷随时间变化得很快，结构的变形也变化得很快，惯性力的作用将不可忽略。

4·This paper takes a living quarter for example to introduce in brief the theory of towing inertia force, calculation formulas, load combination, FEM simulation and structural strength check.

文章以某生活模块为例，对海上运输过程中产生的拖航惯性力的生成理论、计算公式、荷载组合、有限元程序模拟、结构强度校核等进行简要介绍。

5·Main factor that affects internal combustion engine's stability in whole (only internal combustion engine) is crankshaft's rotation inertia force.

而影响内燃机整体稳定性的主要因素(限于内燃机自身)就是曲轴的旋转惯性力。