全部

1·This paper also discussed the influence of rotating speed and sinking speed.

并讨论了转速及沉没度对杆柱变形的影响。

2·The rotating speed of antenna is low when the antenna is driven by lead screw.

传动链末级采用丝杠传动的天线转速较低。

3·This machine cannon has a high rotating speed reaching 500 revolutions a minute.

这架机关炮的转速很高，每分钟可达到500转。

4·Optimum position of sprinkling aperture and formula of rotating speed are derived.

推导出了最佳开孔位置和转速的计算式。

5·The steady rotating speed control is achieved by phase-compensation in sector scan.

在扇形扫描中，马达稳速的控制是通过相位补偿实现的。

6·The measurement torsion and rotating speed can adopt time reckoning and the numeral count law.

扭矩和转速的测量可以采用计时法和数字计数法。

7·The cooling flow rate have more effects on average nu number than rotating speed in this pre-swirl Angle.

该预旋角情况下，进气雷诺数对盘面平均努赛尔特数的影响大于旋转雷诺数。

8·Taking account of motor rotating speed fluctuations, a system equivalent mechanical model is established.

考虑电动机转速的波动，建立了系统的等效驱动力学模型。

9·One kind of rotating speed measurement algorithm, exact counting in limited time, is taken in this design.

介绍了一种转速仪的设计方案，在该方案中提出了一种转速测量算法限时定数法。

10·The mathematical model for rotating speed and hydraulic character of by-pass centrifugal oil filter was deduced.

建立了分流离心式滤清器转速特性和液力特性的数学模型。

转速

1·The problems are:the storage of cumulating variable at power off, multi-byte division, the detection of rotating speed and the control of facilities by AC power.

这几个问题是：累积量的掉电存储问题、多字节除法问题、转速的检测问题和交流电设备的控制问题。

2·The effects of magnitude of blade disorder and disk rotating speed on the vibration mode localization are analyzed.

分析了叶片的失谐量和轮盘的转速对结构振动模态局部化的影响。

3·A high precision and high performance servo-drive system needs a rotating speed estimation algorithm which has high accuracy, fast response and high resolution in a wide range.

高精度高性能的伺服驱动系统需要在宽范围内有精度高、响应快及分辩率高的转速估计算法。

4·It is verified experimentally that both stability of rotating speed and accuracy of linear velocity of this calibrating disk system have achieved or exceeded the desire of designing parameters.

通过试验验证了该校准盘系统的转速稳定性并证明线速精度均达到或优于设计参数的要求；

5·This machine cannon has a high rotating speed reaching 500 revolutions a minute.

这架机关炮的转速很高，每分钟可达到500转。