全部

1·TXT file directory are created.

TXT目录文件就生成了。

2·Select Transport as the File directory

选择 Transport 作为 File directory。

3·There is no file directory, so you won't be confused with file locations.

没有文件目录，所以不易混淆文件地址。

4·Specify c: \ HPU_ControlFiles for the data server data file directory, as shown in Figure 5.

指定c： \ HPU_ControlFiles作为数据服务器数据文件目录(data server data file directory)，如图5所示。

5·Refer to the file directory tree shown in Figure 3 as a reference to where you can find the files.

参考图3所示的文件目录树，以便找到这些文件。

6·Otherwise it must include the full path to the upload file directory that a browser would see.

否则，必须要包含浏览器能够阅读的上传文件目录的完整路径。

7·If was lost when the server restarts temporarily the file below file directory, duplicate will fail.

如果在服务器重启时丢失了临时文件目录下的文件，复制将失败。

8·The simplest solution is to copy the master pages to a file directory that other projects can then reference.

最简单的解决方式是将主版页面复制到其他专案可以参考的档案目录。

9·You can press Enter to accept the default location, or you can enter the full path to your log file directory.

您可以按 Enter 键接受默认名称，也可以输入您的日志文件名称。

10·You have two options, the first is to write a pre-processing exit for the File Directory Receiver that will set the routing information required by Partner Gateway.

您有两种选择，一种选择是为 File Directory Receiver 编写一个预处理的 exit，它将设置 Partner Gateway 所需要的路由信息。