全部

1·Mass transfer rates and wall shear stresses are measured by the electrochemical method.

传质速率及壁面剪切应力的测量采用电化学方法。

2·The shear stresses increase with the external magnetic field, but have saturation values.

当外加磁场增大至粒子达到饱和磁化时，剪切应力达到饱和值。

3·The Simulation of Paper Suspension Flow and the Study on The Pulp Shear Stresses modeling in Headbox.

流浆箱内浆流模拟和浆料作用力的研究。

4·The value of non-uniform distributed factor of shear stresses in the wall, using in present anti-seismic norm, is discussed.

本文还对现行抗震规范中剪应力不均匀系数及窗间墙的简化计算方法进行了讨论。

5·A direct calculation method of the critical shear stresses was established according to experiment datum on simulated rainfall.

提出了采用人工模拟降雨试验数据直接计算临界抗剪切应力的方法。

6·The results show that under shear stresses there are a group of boundary layer solutions near the interface or the fixed boundary.

结果表明，在剪应力作用下，在界面附近和固定边界附近存在一组边界效应解。

7·Optimisation of load distribution to surrounding bone and cement is achieved by conversion of shear stresses to radial-hoop stresses.

通过将剪切应力转化为环形放射状的压应力，假体周围的骨质和骨水泥获得理想的应力分布。

8·The test results show that the peak and residual shear stresses increase linearly with the increase of different normal stress histories.

结果表明，岩石节理峰值和残余剪切应力随垂直应力的增加呈线性增长趋势，而剪胀特性已变得不明显。

9·As a new compactor, oscillatory roller makes rearrangement of material particles in a dense way with a mechanism of rapidly alternating shear stresses.

振荡压路机作为一种全新的路面压实机械，它利用在压实材料中产生快速交变剪应力机理使材料的颗粒重新排列而变得密实。

10·In a special circulating system with high velocity flow, boundary shear stresses in clear water flow, aerated flow and sediment laden flow are measured.

在高速水流循环系统中，用自行研制的剪切力传感器分别量测了清水、掺气水流及挟沙水流壁面上的剪切力；