全部

1·Impact abrasive wear is one of the worst conditions on abrasion.

冲击磨料磨损是一种极恶劣的磨损工况。

2·Abrasive wear may be defined as damage to a surface by a harder material.

磨粒磨损可定义为较硬的材料以一个表面的破坏。

3·Abrasive wear may be defined as damage to a surface by a harder material.

磨粒磨损可定义为较硬的材料对一个表面的破坏。

4·The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear.

主要磨损机制为氧化磨损、粘着磨损和磨粒磨损。

5·Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

其磨损机理主要有塑性涂抹、磨粒磨损和疲劳剥落。

6·The abrasive wear resistance of the coating reduced when WC content was more than 25%.

当粉芯中WC质量分数超过25%后，涂层的耐磨性有所下降；

7·It favours the parts which is used to resisted the abrasive wear in severe impact work.

这对承受严重冲击的抗磨料磨损的机件来说，具有重要的意义。

8·The abrasive wear loss of the coatings was significantly influenced by particle temperature.

分析表明粒子的温度对涂层磨粒磨损质量损失有较大的影响。

9·It has been shown that fatigue spalling is the main wear mechanism, abrasive wear also exist.

结果表明，渗层磨损机制以疲劳剥落为主，兼有磨粒磨损。

10·Its comprehensive coverage focuses on key theoretical and practical considerations of abrasive wear.

它的广泛报导集中在磨损的关键理论和实践考虑。

磨损

1·Its comprehensive coverage focuses on key theoretical and practical considerations of abrasive wear.

它的广泛报导集中在磨损的关键理论和实践考虑。

2·Two typical failures of abrasive wear and cracks for the hook head were studied, and its mechanisms were discussed.

对钩舌产生的两种典型失效形式—磨损和裂纹进行了详细观察，并对其形成机理进行了探讨。

3·Moreover, the coatings with comparative lower abrasive wear rate can be deposited in the condition of moderate flows of oxygen and propane.

氧气流量、燃气流量适中的条件下制备的涂层磨损率较低。

4·Abrasive wear may be defined as damage to a surface by a harder material.

磨损可定义为较硬的材料以一个表面的破坏。