全部

1·A bolt is fastened through the bush to thereby fix the rocker shaft on a cylinder head.

螺栓穿过衬套被紧固，从而将摇臂轴固定在气缸盖上。

2·In this paper, the fracture of the veering fan-shaped rocker shaft was analyzed by means of metallograph and SEM.

通过金相检验，扫描电镜等测试手段对转向齿扇摇臂轴断裂原因进行分析。

3·We currently offer five main product lines of valve guide, rocker arm, precombustion chamber, valve seat insert and rocker shaft.

我公司现有产品包括气门导管、气门摇臂和预燃烧室、气门座、摇臂轴总成各大系列品种。

4·The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by push-rods.

缸盖上装有气门、气门弹簧和摇臂轴上的摇臂，推杆推动这部分气门传动机构工作。

5·The paper analysis the forging craft of rocker shaft bed part, introduce the computing technology of high energy screw press apparent pressure value.

文章分析了精锻工艺的可行性，介绍了高能螺旋压力机公称压力值的计算方法。

6·A plurality of oil passages are formed in a shaft body of a rocker shaft, which partially constitutes a valve drive system of an internal combustion engine.

数个油道形成在构成内燃机的阀驱动系统的一部分的摇臂轴的轴体中。

7·Then out of the steering of the design strength check, mainly steel ball and the raceway contact stress, bending stress and tooth fan rocker shaft diameter determined.

然后对设计出 来的转向器进行强度校核，主要是钢珠与滚道的接触应力、齿扇的弯曲应力和摇 臂轴直径的确定。

8·This structure improves the support rigidity of the rocker shaft and the dynamic characteristics of the valve drive system, and reduces the number of components and the number of working man-hours.

这样的结构改善了摇臂轴的支撑刚度以及阀驱动系统的动力性能，并且减少了零件的数量和人工的工时数量。

9·Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.

气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。

10·The rocker arm pivots around its supporting shaft so that the valve end of the rocker arm is forced downward.

摇臂围绕支承轴旋转，气门与摇臂相对应的一端压下。