全部

1·To save the new setpoint value and exit, press setpoint again.

若要保存新的设定值并退出，请再次按设定值。

2·The flow rate is set and controlled by a user determined setpoint.

流速由用户确定的设定点设定并控制。

3·The change of the value for machine output setpoint is not accepted.

不接受“ 压片机输出设定值”的改变。

4·The setpoint setting range can be limited to a minimum (P05) and maximum (P06).

设定点设定范围可以限制在最低限度(P 05产)和最高(P 06)。

5·When altitude limitation is on the gas stick is now used to change the setpoint.

当高度限制是对气体棒现在用来改变设定值。

6·These alarms feature digital setpoint controls, delay timers, and universal inputs.

这些报警功能的数字设定点控制，延时定时器，和普遍的投入。

7·Large correcting effect maintains constant setpoint immune to supply pressure variations.

大型纠正效果设定值保持不变免疫供应压力变化。

8·The setpoint control of the Ievel is one of the principal factors that cause the flow oscillation.

液位的定值控制是造成物流频繁变化的主要因素之一。

9·It delivers accuracy with 0.025 psi Max supply pressure effect to hold setpoint regardless of fluctuating supply.

它提供0.025防扩散精度最高的供应压力的影响，不论持有设定点供应的波动。

10·Leads of single double contacts: lower limits is contact 2, upper limits setpoint is contact 1, contact 3 is public port.

表中双接点连接导线为：接点2为下限设定点，接点1为上限；设定点，接点3为公共端。