全部

1·A fluid bed requires a catalyst that is mechanically stronger than the pure oxides.

一台流化床要求一种比纯氧化剂更强的催化剂。

2·A fluid bed equipped with an electrode grid to charge powder so that it is deposited on an earthed component.

使用电极栅使粉末充电并沉积在接地的工件上的一种流化床设备。

3·Combustion and heat transfer character are the technical basis of combustion in circuiting fluid bed boilers.

燃烧和传热特性是循环流化床锅炉的燃烧技术基础。

4·Manufacturing methods, especially a China patent spouted-fluid bed technology, have been discussed in this paper.

本文介绍了它的几种制备方法，重点关注国家专利技术——喷动流化法。

5·In the control mode of steam water side, circulating fluid bed boiler is basically the same as pulverized coal boiler.

循环流化床锅炉与煤粉相比，在汽水侧的控制方式上基本相同。

6·Using fluid bed coating equipment, the pellets was coated with HPMC. Results the results of dissolution test was good.

采用微型流化床包衣设备，将微丸包上HPMC薄膜衣，并测定了溶出度。

7·The fluidizing characteristics and powder discharge process of gas fluid bed reactor with Hypol process were described.

介绍了聚丙烯流化床反应器流化特性和卸料过程；

8·The experimental installation include a fluid bed reactor and other subsidiary units of heating, separation and controlling.

实验装置包括加热、反应、分离和控制等部分。

9·Fluid bed dryer bags are another example of equipment that is difficult to clean and is often dedicated to a specific product.

流体床的干燥器袋是很难清洗的设备之一，经常用于特定的产品。

10·METHODS To prepare sustained release pellets using fluid bed, then to get pulsatile-sustained tablet after tabletting and coating.

方法采用流化床包衣法制得缓释微丸，将微丸压片后包衣制得时控脉冲缓释片。

流化床

1·In fluid bed, both particles and carrier gas occur violent turbulence so that the heat transfer and mass transfer in the furnace are speeded.

在流化床中，粒子和炉气发生剧烈的紊流运动，加快了炉内传热和传质过程。

2·A description is given of the use of the fluid bed cooling and dedusting technology for the first time in the product urea dust collection in medium nitrogenous fertilizer plants.

介绍了流化床冷却除尘技术首次应用于中氮肥厂成品尿素除尘的情况。

3·The author makes analysis and description on the control features of circulating fluid bed boiler and puts forward control methods.

针对循环流化床锅炉控制的特点进行了分析和阐述，并提出了控制方法。

4·This paper introduces the orthogonal optimization experiment design of operating factors and the actual experiment results on a fluid bed reactor of acrylonitrile apparatus.

本文介绍了丙烯腈装置流化床反应器操作条件的正交优化设计以及现场试验结果。

5·Based on fixed fluid bed reactor and GOR Q catalyst, the influence of process parameters on decreasing gasoline olefin was studied.

在实验室小型固定流化床反应器上考察了工艺参数对国产GOR - Q催化剂降低催化汽油烯烃的影响。