全部

1·The new method is called welded line tangent method which forms a kinematics model for the robot operating in the bent degree based on the judgment of the tacking system.

该方法是根据焊缝跟踪系统判断焊缝的弯曲程度，确定机器人的运动学模型。

2·By converting test condition to the standard pressure condition, calculation accuracy of average pressure impulse coefficient method is superior to that of tangent method.

换算到标准压强条件下，平均压强冲量系数法的计算精度优于切线法的计算精度，并作出了计算验证。

3·Two methods have been presented in this paper to treat this case. They are tangent method and minimum equivalent linear damping method. Their relation has been found, too.

为此，本文提出了两种处理方法，即切线法和最小当量线性阻尼法，并找出了它们的关系。

4·When surveying major diameter and higher hanging pipeline, common trigonometric leveling can't meet precision requirement, but tangent method surveying can meet precision requirement.

在悬空管线测量中，对于管径大、悬空高的管线，用普通三角高程法测量很难满足精度要求，而用切线法测量则很容易达到精度要求。

5·On regular highway reconnaissance work the tangent offset method is the most common one on highway route center stake layout but this method is limited because of route tangent as baseline for offset.

在公路常规勘测设计工作中，切线支距法是一种常用的中桩放样方法，但该方法以路线切线为基线，使用条件受到限制。

6·Surface electroosmosis method can reduce coal tangent ial resistance but the pole distribution affects the result of reducing resistance.

表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。

7·In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.

分析齿轮主要参数，提出用测量跨棒（）和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法，并推导出螺旋角的计算公式。

8·The advanced instrumented impact test equipment and the method for treating test data with the hyperbolic tangent function ensure the accuracy of results.

采用了仪表化冲击试验设备和双曲正切函数回归计算的数据处理方法，因而确保了实验结果的准确性。

9·By using improved variational method, the internal energy per plaquette and the specific heat curves of the Tangent action in SU(2) lattice gauge theory arc worked out.

利用改进变分法求出了正切作用量的四维SU_（2）格点规范理论的元格内能和比热曲线。

10·For the tangent plane can be achieved by running continuous power flow method only once, it's possible to realize the online calculation of the static voltage stability region.

由于利用文中方法只需通过一次连续性潮流计算即可获得稳定域边界上的切平面，使得稳定域的在线计算及可视化成为可能。