extrusion pressure 双语例句
全部
1·It will reduce extrusion pressure, energy consumption and die loss.
降低挤压力,减少能耗及模具损耗。
2·The effect of billet size on the effective strain and unit extrusion pressure was investigated during equal channel angular pressing.
研究了坯料尺寸对等径角挤压材料等效应变及单位挤压力的影响。
3·A three dimensional upper bound analysis technique for calculating the extrusion pressure of a spline shaft was presented in this paper.
本文给出了花键轴开式整体凹模挤压时挤压力计算的三维上限分析法。
4·The influence of the isothermal temperature, the stirring speed and the extrusion pressure on quality of the formed parts were investigated.
研究了半固态等温温度、搅拌速率和挤压力对成型件质量的影响。
5·The size dimension of the ion imprinting polymer porous small ball can be controlled by controlling the extrusion pressure and oscillation frequency.
该离子印迹聚合物多孔小球可以通过控挤出压力和振荡频率来控制尺寸大小。
6·The simulation results show that, at the same relief discharge, the bigger the permeability is, the bigger the extrusion pressure of casing damage is.
研究表明:在放喷流量相同的情况下,渗透率越低,储层厚度越薄,压差越大,套管承受的挤压力就越大。
7·By introducing the concept of the equivalent external extrusion pressure, the obtained formulae are the same with the formulae of API standard in format.
引入等效外挤压力概念,使该公式与标准API公式在形式上完全一致。
8·The raw materials, extrusion pressure, pressure holding time and molding temperature during extrusion moulding have great effects on the quality of products.
挤压成型过程中原材料、挤压力、保压时间和成型温度对制品的品质影响较大。
9·The simulation results show that, with increasing the milling time, the densification of powders becomes more and more difficult, and the needed extrusion pressure substantially rises.
分析结果表明, 随着球磨时间的延长, 粉末固结致密难度增加, 所需挤压力显著增大。
10·The result showed that proper vibration force field could reduce the extrusion pressure and the extrusion power, and could effectively improve the mixing degree of filled polymer system.
结果表明,在一定的振动条件下,振动力场的作用使挤出压力减小,挤出功率降低,混合分散效果明显提高。
