全部

1·Different mold steel and high speed steel models, the corresponding price difference is very large.

不同的模具钢和高速钢的型号，对应的价格差异也是非常的大的。

2·Introduced the properties, main manufacture methods and application of casting high speed steel rolls.

着重介绍铸造高速钢轧辊的性能特点、主要制造方法和在轧钢行业中的应用。

3·The paper deals with YG6 coating on fore-and-aft face of high speed steel tool with high power CO_2laser.

利用高功率CO_2气体激光器对高速钢刀具前、后面进行YG6表面涂敷；

4·The valence electron structures and covalent bond energy have been calculated for cobalt high speed steel.

计算了含钴高速钢的价电子结构与共价键能。

5·The results indicate that pulse magnetization can significantly prolong the lifetime of the high speed steel tools.

结果表明，脉冲磁化处理能够明显地提高高速钢刀具寿命。

6·Incomparision to tile traditional power hacksaw blade made of high speed steel, this blade was very cheap and tough.

与传统的高速钢锯条相比，这种锯条的韧性大大改善，而成本大幅度降低。

7·All normal designs are made of high speed steel quality material no. 1.3343 and can be supplied in cobalt alloyed too.

所有的普通设计都是选用高速钢材质，钢号：1.3343并可提供钴合金材料。

8·The wear of the unmagnetized and magnetized high speed steel material are compared in the wear between pin and disk text.

通过销盘的磨损对比试验，对进行了磁化处理的与未作磁化处理的高速钢材料作了耐磨损性能的研究。

9·The present paper has briefly described the basical technologies of sintered high speed steel products and their properties.

本文简述烧结高速钢制品的基本生产工艺及其性能。

10·This method is launched in 1970, the special steel industry, quickly promoted to improve the performance of high speed steel.

这种方法是在1970年推出后，特殊钢行业，迅速晋升为提高高速钢的性能。

高速钢

1·The present paper has briefly described the basical technologies of sintered high speed steel products and their properties.

本文简述烧结高速钢制品的基本生产工艺及其性能。

2·The effects of RE compound modificator on the mechanical properties and microstructure of high carbon high speed steel used for roller ring were investigated by SEM, EDS and EPMA.

通过扫描电镜、能谱分析仪和电子探针研究了稀土复合变质剂对离心铸造的高碳高速钢轧辊组织和力学性能的影响。

3·Diamond-like carbon DLC thin films were deposited onto si 100 and high speed steel substrates by mid-frequency magnetron sputtering system SP0806AS, Beijing Power tech Co.

采用SP0806AS中频磁控溅射镀膜机，在硅(100)和高速钢基体上，采用双石墨靶在不同功率下沉积了类金刚石薄膜。

4·According to real production case of our country, it is necessary to establish the standard about the conversion tables on hardness and strength of hardened high speed steel.

根据我国具体的生产实际情况，有必要建立我国自己的淬硬高速钢洛氏硬度和维氏硬度换算的标准。

5·All normal designs are made of high speed steel quality material no. 1.3343 and can be supplied in cobalt alloyed too.

所有的普通设计都是选用高速钢材质，钢号：1.3343并可提供钴合金材料。