全部

1·This series air compressor widely used in pneumatic lock, pneumatictool, t ere en fe inflation, blowing process, spray paint, sand blasting and fluidic element.

本系列空气压缩机广泛用于气动夹固、风动工具、轮胎充气、吹制工艺、喷漆、喷砂、射流元件及共它需要压缩空气的场所。

2·Due to the differences of gas - liquid physical property, the key component of new pneumatic efflux hammer, namely, pneumatic efflux element, must be researched.

由于气液物性不同，故新型气动射流冲击器的核心部件——气动射流元件的切换性能需进行研究。

3·On the basis of non linear finite element method, fundamental equation and solution of pneumatic membrane structure finite element analysis are put forward.

以非线性有限元法为基础，提出充气薄膜结构有限元分析的基本方程及解法。

4·Some essential aspects, such as linear pneumatic resistive element design and experimental studies, signal condition and transformation, etc... were investigated in the paper.

研究工作包括线性气体阻尼元件的设计、优化和实验研究，信号电测和变送，以及流量测量系统的设计和特性分析。

5·For the latter, a pneumatic multiplier and an approximate dead-time element using long tu...

属于后者的是气动乘法元件和以长导管构成的近似纯滞后元件。

6·Our main products cover actuating element (cylinder), pneumatic component (valves), air source processing unit, air hose, auxiliary components and integrated system.

公司主要产品有：执行元件(气缸)、气动控制元件(阀)、气源处理元件、空气软管、辅助元件以及成套系统。

7·This series air compressor widely used in pneumatic lock, pneumatic tool, tire inflation, blowing process, spray paint, sand blasting and blasting and fluidic element.

本系列空气压缩机广泛应用于气动夹固、风动工具、轮胎充气，吹制工艺、喷漆、喷砂、射流元件及其他需要压缩空气的场所。

8·In view of the line and surface tactility displayed by the pneumatic nozzle array, a fluid-structure coupled finite element model of the finger skin and nozzle was established.

针对气动喷嘴阵列喷气再现线面触觉问题，建立手指皮肤和喷嘴的流固耦合有限元模型。

9·The probe comprises a continuous prove tubing element extending through a rigid probe member and connecting the probe tip to a pneumatic pressure regulation device.

探针 包括延伸贯穿刚性探针部分并且将探针头连接到气压调节设备的连续性的管道元 件。

10·YU Fuquan. Finite Element Analysis of Structure Mechanics of Gear Pneumatic Motor [D]. Changchun: Jilin University, 2011.

[7]于福权。齿轮式气动马达结构力学有限元分析[d]。长春：吉林大学，2011。