全部

1·To change tracks, bendable switches are used which consist of a continuous steel beam which is elastically bent by means of electro-mechanical setting drives.

若要改道，可采用曲性道岔。这些曲性道岔由无缝钢条组成，通过机电制导装置，使其柔性弯曲。

2·The mechanical device to control the date and week activities space at night, if you change the setting at this time, it will disrupt the original rules.

控制日期及星期的机械装置在夜间有活动空隙，如果您在这个时间更改设定，就势必会打乱原有规律。

3·The effect of heat setting conditions on the elastic resilience of IPP fibers has been investigated. The elastic resilience compares with other mechanical properties.

作者研究了热定型条件对丙纶弹性回复率的影响，并将回弹率与纤维的其它力学性质作了对比。

4·Setting modern cold-strip rolling mill's offset is due to mechanical restriction which keeps the stability of the roll system, and is produced by horizontal force.

现代冷带轧机的偏移距设置源于保证轧机辊系稳定性的力学约束，靠轧机辊系在负载状态下作用于轧辊的水平力来实现。

5·The regulator of Gongboxia hydropower station adopts microcomputer-based electrohydraulic regulator adding servo devices system structure, dividually setting electrical cabinet and mechanical cabinet.

公伯峡水电厂调速器采用微机电液调速器加电液随动装置的系统结构，电气柜和机械柜分开设置。

6·These results can be used as the basis of setting up mechanical model of PUR foam plastics.

这些结果可以作为建立PUR泡沫塑料力学模型的基础。

7·Slope in certain Geological setting and in a certain Mechanical Environment requires a certain rainfall, rainfall intensity or duration to promote slope damage.

在一定地质背景和力学环境下的斜坡需要一定的降雨量、降雨强度或降雨持续时间才能促使斜坡破坏。

8·By setting up mechanical sand barriers on degenerated Haloxylon ammodendron woodland, the roughness of woodland increased; the wind speed an.

布设机械沙障可使退化梭梭林地表粗糙度增大，林内近地面层风速、输沙量显著下降。

9·Desulphurization render gypsum can be prepared using composite retarder and some tests study on the setting time and mechanical property of desulphurization render gypsum.

采用自制的复合缓凝剂配制出脱硫粉刷石膏，并对脱硫粉刷石膏的凝结时间及力学性能进行了研究。

10·The study results on mechanical properties of fine cement grout and its calculus, including cohesion, stability, setting time, compressive resistance and impervious strength, etc.

介绍了细水泥浆液及其结石的物理力学特性（粘度、稳定性、凝结时间、抗压和抗渗强度等）的改性研究成果。